Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
ADR 2010 Very slow to load Civil 3D model with Feature lines
ADR 2010 Very slow to load Civil 3D model with Feature lines
I produced a surface in C3D and then published it to DWF (3DDWF) it looks fine and loads quickly. Then I added some Feature lines draped over the model and when I load this DWF file in ADR 2010 it takes forever to load (almost an hour). Is this normal or can something be done to speed up the loading (I can't really use the DWF file in a presentation if it takes 45 minutes to load).
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")