Design Differently

Getting Started with Fusion 360: Start with an empty design

by Product Support July - last edited July

This is for all the brand new Fusion 360 users. I’ll show you how to create a new Fusion design. Then we’ll look at how you can start with some simple shapes.

 

Start a new design

Create a new Fusion design to get started. Click the Create menu then select Design.

 

EmptyDesign1.png

 

Give your design a name and assign a project. Use projects to organize your designs and related data.

 

EmptyDesign2.png

 

A new empty design is created and opened. This is your blank canvas to create anything you like. We’ll create some simple shapes to introduce you to the different types of geometry you can create.

 

Create basic bodies

We’ll start in the Model workspace. Use the Model workspace to create prismatic shapes with straight faces and edges. There are basic shape commands in the Create menu (box, cylinder, sphere, and coil). Click on Box to begin creating a box. Select the bottom (XZ) plane then pick two points to define the corners of a rectangle. Specify a height by entering a value in the dialog box or by dragging the manipulator arrow. You can use the values shown in the dialog or use your own values. Click OK to complete the box.

 

 

EmptyDesign3.png

 

The commands in the Create menu can be used to add geometry to a body. Use Cylinder to add to the box you just created. Click the Cylinder command in the Create menu. Select the top face of the box to position the cylinder. Move the cursor to the midpoint of the top edge and click to specify the center of the cylinder. Click on one of the corners to specify the diameter of the cylinder.

 

EmptyDesign4.png

 

Specify -10 mm for the height in the dialog or by dragging the manipulator arrow. Change the Operation to Join to add material to the body and click OK.

 

EmptyDesign5.png

 

The body should look similar to this, depending on the values you used.

 

EmptyDesign6.png

 

Use sketches to create bodies

Use 2D sketches to create bodies that are more complex than a simple cube or cylinder.  We’ll create and “L” shape sketch but 2D sketches can be as complex as needed.

 

Start the 2-Point Rectangle command in the sketch menu.

 

EmptyDesign7.png

 

Select the same XZ plane you used for the box earlier.  Click a point to position the first corner of the rectangle then enter 10, press <Tab>, enter 75, and press <Tab> again. Click to finish the rectangle. Dimensions are added automatically when you enter values for the size instead of picking points.

 

Repeat the process to create a 65 mm by 10 mm rectangle perpendicular to the first rectangle.

 

Start the 3-Point Arc command in the Sketch menu. Pick the two top corners of the first rectangle then move the cursor and click when you see the tangent symbol tangentsymbol.png . Repeat this process to create an arc on the second rectangle. The sketch should look like the “L” shape below.

 

EmptyDesign8.png

 

Click the Extrude command in the Create menu. Click the four profiles (two rectangles and two arcs) then specify 10 mm for the Distance. Click OK to create the new body.

 

EmptyDesign9.png

 

Create sculpted forms

Organic shapes are also very easy to create using Fusion 360. Use the Sculpt workspace to create organic shapes. Click Create Form in the Create menu to enter the Sculpt workspace. Read the prompt that is displayed then click OK to dismiss it.

 

EmptyDesign10.png

 

The Sculpt workspace has the same simple shapes that we saw in the Model workspace plus a few more. Sculpt also has Extrude, Revolve, Sweep, and Loft for create bodies using 2D sketches. It is most common to start with a simple shape when in the Sculpt workspace. Click Box in the Create menu.

 

EmptyDesign11.png

 

Pick the same XZ plane that we used to start the first box. Pick a point for the center of the rectangle then enter 25, press <Tab>, enter 100, and press <Tab>.

 

EmptyDesign12.png

 

The number of faces on bodies determines the control you have over the shape. You want to use the minimum number of faces on a body to give the desired control. Enter 4 for the Length Faces and Width Faces then click OK to create the box.

 

EmptyDesign13.png

 

Use the Modify commands to make changes to the bodies in the Sculpt workspace. Click Edit Form in the Modify menu.

 

EmptyDesign15.png

 

Double-click on the middle edge to select the entire ring of edges. Drag the corner manipulator to change scale the edges. Click one of the arrow manipulators to move the edges. Continue to experiment with the manipulators to see the affect they have on the body.

 

EmptyDesign163.png

 

When you are satisfied with your shape click Finish Form to return to the Model workspace.

 

EmptyDesign17.png

 

Congratulations! You have created your first bodies in Fusion 360. Be sure to check out the Learning area of the Fusion website for more tutorials, videos, and help content.

 

EmptyDesign18.png

 

More to come. Design Differently!

 

-Patrick

 

 

 

 

 

 

 

 

 

About the author
Post a Comment
Be sure to enter a unique name. You can't reuse a name that's already in use.
Be sure to enter a unique email address. You can't reuse an email address that's already in use.
Type the characters you see in the picture above.Type the words you hear.
Design Differently

Design trends, useful tips and tutorials, behind-the-scenes news, and community stories.

Showing results for 
Search instead for 
Do you mean