CAD Managers

Reply
Active Member
pedderd
Posts: 8
Registered: ‎04-18-2012
Message 1 of 3 (789 Views)

Some basic CAD Standards questions

789 Views, 2 Replies
02-08-2013 01:04 PM

Can I please ask for some advice ?

 

I am tasked with setting up CAD Standards for a business of up to 20 AutoCAD users. I have set up standards previously in 3 different companies, and my own opinions on how certain best practices should be followed - suiting our sector (architecture).

 

Now, my biggest question is whether I should utilise the CAD Standards functionality in AutoCAD, or whether I just control with the written procedures and tool palettes. There appears to be many resources out there for CAD standards, but I would appreciate a good start point for this is someone has one ?

 

It would be useful to check compliance automatically on users work, but I see no reason to create a big brother is watching you mentality. But clearly we do want to be producing drawing information that is consistant within the company.

 

Can anyone please give me some pointers here ? I am happy to spend time reading up, if I get a recommended start point.

 

Many thanks all.

*Expert Elite*
pendean
Posts: 22,494
Registered: ‎11-06-2003
Message 2 of 3 (786 Views)

Re: Some basic CAD Standards questions

02-08-2013 01:06 PM in reply to: pedderd

Use AutoCAD's built-in functionalities, and use AutoCAD Templates to set accurate go-by files for all users: at some point a user needs to pre-check compliance of their files before passing them up for review IMHO.

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
*Expert Elite*
dgorsman
Posts: 5,367
Registered: ‎10-12-2006
Message 3 of 3 (749 Views)

Re: Some basic CAD Standards questions

02-11-2013 07:46 AM in reply to: pedderd

Doesn't matter what path you take, just make it easier for the users to do it right in the first place.  If its easier to do it wrong they generally will.

----------------------------------
If you are going to fly by the seat of your pants, expect friction burns.
Adopt. Adapt. Overcome. Or be overcome.
A good question will be halfway to a good answer.


Announcements
Manufacturing CAD & IT Manager Resource
Additional information for installing, licensing & deploying Inventor, the Product Design Suites and Factory Design Suites.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.