When switching between layers, Zooming, or changing views my drawing will lockup for about 5 min and then I am able to work again.
AMD Phenom Quad Core
Not sure what direction to take from here.
You may have too many layers in the drawing. AutoCAD drawings that have a large number of layer filters can affect system performance significantly. In some cases, you may not even be able to access the Layer Properties Manager. To remove layer filters from a drawing, use the FILTERS command. (See http://usa.autodesk.com/adsk/servlet/ps/dl/item?si
The excess layer filters alert is controlled by the sysvar LAYERFILTERALERT.
1 When the Layer Manager is opened, deletes all layer filters; no message is displayed
2 When the Layer Manager is opened, displays a message that states the problem, recommends deleting all filters, and offers a choice: "Do you want to delete all layer filters now?"
3 When the drawing is opened, displays a message that states the problem and offers to display a dialog box where you can choose which filters to delete
The default for the sysvar is 2 i.e. the alert will display only when the Layer Manager is open.
Hope this helps.
Access a broad range of knowledge to help get the most out of your products and services.
Start with some of our most frequented solutions to get help installing your software.
The Buzzsaw forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.
Upgrading to a 2015 product? Make sure to check these out 1st!