AutoSketch

Reply
Member
robertschatz
Posts: 3
Registered: ‎03-03-2011
Message 1 of 5 (1,507 Views)
Accepted Solution

Sketch9 file conversion to dxf problems

1507 Views, 4 Replies
03-03-2011 08:42 AM

I am trying to convert my sketch file to dxf, however, some will not convert.  r the program has an application-fatal error with program shutdown.    

 

Any thoughts or could someone convert this SKF file.   For reason I have tried to attach but it does not like the SKF extension

Thanks

Bob Schatz

 

 

 

Wow, that's a lot of layers. I deleted every one that was turned off and it then saved as a DXF.

 

Let me know if you continue to have issues (I use AS10 in Win7 32 bit).

Member
robertschatz
Posts: 3
Registered: ‎03-03-2011
Message 2 of 5 (1,506 Views)

Re: Sketch9 file conversion to dxf problems

03-03-2011 08:50 AM in reply to: robertschatz

I figured out a way to attach my file. Just change the extension back to an skf file.

Mentor
StevenMac
Posts: 161
Registered: ‎02-20-2009
Message 3 of 5 (1,497 Views)

Re: Sketch9 file conversion to dxf problems

03-04-2011 02:03 AM in reply to: robertschatz

Wow, that's a lot of layers. I deleted every one that was turned off and it then saved as a DXF.

 

Let me know if you continue to have issues (I use AS10 in Win7 32 bit).

Member
robertschatz
Posts: 3
Registered: ‎03-03-2011
Message 4 of 5 (1,474 Views)

Re: Sketch9 file conversion to dxf problems

03-07-2011 06:39 AM in reply to: StevenMac

Steve thanks for the effort.   Can you attach the file you converted.   Also you mentioned you deleted some layers, can you convert with all the layers I supplied.

 

Thanks for the help!!

Bob Schatz

Airspace Specialist

Denver TRACON

Mentor
StevenMac
Posts: 161
Registered: ‎02-20-2009
Message 5 of 5 (1,457 Views)

Re: Sketch9 file conversion to dxf problems

03-08-2011 11:28 AM in reply to: robertschatz

It refuses to convert with most layers, so you have to keep deleting those layers that are turned off until it works.

 

Here's a DXF (2007) and DXF (R12)

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.