I have autosketch 8 at my office, while I do work with autosketch 10 at home. I have working with autosketch for over 10 years. Here is an issue I am not sure if it can be done. I have a coworker that still draws by hand, and I am helping him out by plotting out a plan for him that he received from an archiitect. This is a huge area, probably about 250 feet wide, and close to one mile long. He is working on a landscape plan along a roadway. He wants this at somewhat of a workable and readable scale. I have plotted his drawing out in 1"-30 ft. However, I have had to do this in sections, which is about 13 --24" x 36" plans, that he will have to tape together, and than do his paper overlay. The plotter we have is a roll feeder. Is there a way to set up a 30 scale template, and plot all of his drawings on one long roll? We have two plotters at work, one being a roll feeder HP, and the other one being an OCE. The OCE has the option of 24" or 36" wide roll. I cannot figure this out, or if it is even possible. Is there a template that I have to set up, which I cannot figure out with autosketch. Thanks for your help.
p.s.---my coworker is about to retire, and he will not be changing over to a CAD program.