AutoSketch

Reply
*Weiner, Don
Post 1 of 7

Microstation Files

177 Views, 6 Replies
12-06-2001 06:25 AM
Is there any easy way to import Microstation (r) .dgn files into AS7?

Thanx,

Don Weiner, PE, RCDD
Don Weiner Associates
*Norris, Ric
Post 2 of 7

Re: Microstation Files

12-06-2001 08:29 AM in reply to: *Weiner, Don
The Microstation file firstly needs to be saved as a .DWG at best or a .DXF
at worst.....there ain't no other options.

Ric Norris.
http://users.bigpond.net.au/cavedrawings


"Don Weiner" wrote in message
news:3C0FF045.2FC15553@bellatlantic.net...
> Is there any easy way to import Microstation (r) .dgn files into AS7?
>
> Thanx,
>
> Don Weiner, PE, RCDD
> Don Weiner Associates
>
*Ehman, John
Post 3 of 7

Re: Microstation Files

12-06-2001 08:31 AM in reply to: *Weiner, Don
I import into TurboCad and then export as .dwg. It is as good as any
conversion software I have tried but none of them are perfect. It takes some
cleaning up.
John
"Don Weiner" wrote in message
news:3C0FF045.2FC15553@bellatlantic.net...
> Is there any easy way to import Microstation (r) .dgn files into AS7?
>
> Thanx,
>
> Don Weiner, PE, RCDD
> Don Weiner Associates
>
*Rafuse, L.
Post 4 of 7

Re: Microstation Files

12-07-2001 06:13 AM in reply to: *Weiner, Don
I use Solid Edge Origin to convert from DGN to DWG. AutoSketch can read
the DWG.

--
Len Rafuse
Vision Engineering


Don Weiner wrote:

> Is there any easy way to import Microstation (r) .dgn files into AS7?
>
> Thanx,
>
> Don Weiner, PE, RCDD
> Don Weiner Associates
*Weiner, Don
Post 5 of 7

Re:

12-07-2001 07:43 AM in reply to: *Weiner, Don
Len,

Thanx for the info. Are you located in Europe? Unfortunately the offer for
Solid Edge Origin is not available in the US. Oh well.


Don Weiner, PE, RCDD
Don Weiner Associates

"L. Rafuse" wrote:

> I use Solid Edge Origin to convert from DGN to DWG. AutoSketch can read
> the DWG.
>
> --
> Len Rafuse
> Vision Engineering
*Rafuse, L.
Post 6 of 7

Re:

12-07-2001 08:04 PM in reply to: *Weiner, Don
No. It was available in the US.

--
Len Rafuse
Vision Engineering


Don Weiner wrote:

> Len,
>
> Thanx for the info. Are you located in Europe? Unfortunately the offer for
> Solid Edge Origin is not available in the US. Oh well.
>
> Don Weiner, PE, RCDD
> Don Weiner Associates
>
> "L. Rafuse" wrote:
>
> > I use Solid Edge Origin to convert from DGN to DWG. AutoSketch can read
> > the DWG.
> >
> > --
> > Len Rafuse
> > Vision Engineering
Member
3 Posts
0 Kudos
Registered: ‎07-17-2007
Post 7 of 7

Re: Microstation Files

07-17-2007 02:34 PM in reply to: *Weiner, Don
What about AS 9 DWG to Microstation .dgn files?

Thanks, Ken
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post