AutoSketch

Reply
New Member
sam_miller
Posts: 1
Registered: ‎01-28-2002
Message 1 of 9 (780 Views)

auto sketch 2.1

780 Views, 8 Replies
01-28-2002 04:50 AM
i am in desperate need of auto sketch 2.1.i know this version has long been outdated but if any one has a copy i sure would like to borrow it long enough to load it on my hard drive.
*Support, Autodesk
Message 2 of 9 (780 Views)

Re: auto sketch 2.1

01-28-2002 05:07 AM in reply to: sam_miller
Sam, if you need to convert an AutoSketch 2.0 .SKD file into a format
that AutoSketch 7 or 8 will read, there is a file conversion utility
that can open, and save (only) so that your drawing will open in the
later Sketch versions. It's also located in the Sketch 7 "21fc" folder
on the CD.

Otherwise it can be located from our downloads page.

Search for it here: http://support.autodesk.com/enu/Homepage.asp

sam_miller wrote:

> am in desperate need of auto sketch 2.1.i know this version has long
> been outdated but if any one has a copy i sure would like to borrow it
> long enough to load it on my hard drive.

--
Bob Felton
Autodesk Product Support, Americas
WW Support and Services, Autodesk
Discussion Q & A: <>
*McCormick, Derek
Message 3 of 9 (780 Views)

Re: auto sketch 2.1

02-06-2002 09:24 PM in reply to: sam_miller
I have a cd copy -m how do I get it 
you?

 

rgds

Derek McCormick


style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
am
in desperate need of auto sketch 2.1.i know this version has long been
outdated but if any one has a copy i sure would like to borrow it long enough
to load it on my hard drive.
*Brown, Anne
Message 4 of 9 (780 Views)

Re:

02-10-2002 10:10 AM in reply to: sam_miller
Derek -

Gentlemen -

Please remember that "sharing" of CDs is not permissable under
the terms of your software agreement. Sharing those CDs, even old
versions, is software piracy.

Sam, if you are in the United States, try calling the
Autodesk Customer Service Center at 800-538-6401 to see if there
is any way they can help you out. If you are not in the US (and I
cannot tell from your email address), look in
http://www.autodesk.com for the Autodesk office phone number in
your location.
---
Anne Brown
Manager, Moderator
Autodesk Product Support Discussion Groups
Discussion Q&A: http://www.autodesk.com/discussion

Derek McCormick wrote:
>
> I have a cd copy -m how do I get it you?
New Member
elizabeth.gardner
Posts: 2
Registered: ‎12-05-2013
Message 5 of 9 (651 Views)

Re: auto sketch 2.1

12-05-2013 04:24 AM in reply to: sam_miller

Hi there,

 

I have downloaded and installed the free and limited version of Auto Sketch to try and convert some old archive files to dwg (or dxf).  I can open them with no problem but the save as function (as save doesn't work!) will only allow me to save as skd or skt.

 

Do you have any suggestions please?

 

Thanks in advance...

*Expert Elite*
pendean
Posts: 22,513
Registered: ‎11-06-2003
Message 6 of 9 (644 Views)

Re: auto sketch 2.1

12-05-2013 10:53 AM in reply to: sam_miller
You need a full version of the software, not the freeware.
Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
New Member
elizabeth.gardner
Posts: 2
Registered: ‎12-05-2013
Message 7 of 9 (639 Views)

Re: auto sketch 2.1

12-06-2013 12:43 AM in reply to: sam_miller

Ok - thank you.  I'll contact Autodesk directly and/or find a re-seller.

Active Contributor
thixoman
Posts: 35
Registered: ‎09-23-2002
Message 8 of 9 (358 Views)

Re: auto sketch 2.1

03-25-2014 11:56 AM in reply to: elizabeth.gardner

Hi Elizabeth

 

send me email  crosby_a@hotmail.com

Active Contributor
thixoman
Posts: 35
Registered: ‎09-23-2002
Message 9 of 9 (302 Views)

Re: auto sketch 2.1

04-09-2014 05:22 PM in reply to: sam_miller
contact me asap
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.