Autodesk Architectural Desktop 2007 & Prior

Autodesk Architectural Desktop 2007 & Prior

Reply
*F. Gump
Message 1 of 3 (450 Views)

xref fatal error: 0x0020

450 Views, 2 Replies
04-26-2005 08:11 AM
Opened a ADT 2005 format drawing with xrefs atached.
Issued the XREF command and ADT2006 crashes with this error:

FATAL ERROR: Unhandled Access Violation Reading 0x0020 Exception at 20h
*F. Gump
Message 2 of 3 (450 Views)

Re: xref fatal error: 0x0020

04-26-2005 01:32 PM in reply to: *F. Gump
I removed QuikPik and I no longer see the errors.


"F. Gump" wrote in message
news:4826006@discussion.autodesk.com...
> Opened a ADT 2005 format drawing with xrefs atached.
> Issued the XREF command and ADT2006 crashes with this error:
>
> FATAL ERROR: Unhandled Access Violation Reading 0x0020 Exception at 20h
Contributor
P-BUBBA
Posts: 14
Registered: ‎06-03-2005
Message 3 of 3 (450 Views)

Re: xref fatal error: 0x0020

03-28-2006 11:25 AM in reply to: *F. Gump
Well, this is prbly too late to help the original post, but if anyone else is trying to hunt this problem down, this may help. I recently ran into the exact same error in a drawing file that I had been working on previously. The drawing would open properly, but when I would go to a different tab, model or ps, it would crash with the 'unhandled error' message. It had Xref's/image files that 'lost' the file path. I tried to detach the files, as they were no longer needed, saved the file to a new location, reopened the file, but i would have the same problem. The next step was to re-direct the file paths (in the image manager), audit and purge, and this apparently fixed the problem. I hope someone else that is getting frustrated with this error can utilize this info, as it caused me a great deal of headache!!!
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.