Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
We have a drawing in which someone created new wall styles specifically for that drawing. (not according to company standards of course)
Anyway, we found that the cut plane was set to 7'6" on these walls and of course the RCP was screwed up. We have fixed this three times by editing the wall styles and saving. But on restart and reopen the cut plane reverts back to 7'6".
What...is going on?
Maybe the cut plane is set by object, not by display.
I sometimes overide the standard cut plane to show a window that
has a higher sill then normal.
Leo
wrote in message news:5140996@discussion.autodesk.com...
We have a drawing in which someone created new wall styles specifically for
that drawing. (not according to company standards of course)
Anyway, we found that the cut plane was set to 7'6" on these walls and of
course the RCP was screwed up. We have fixed this three times by editing the
wall styles and saving. But on restart and reopen the cut plane reverts back
to 7'6".
What...is going on?
calfcreek wrote:
> Anyway, we found that the cut plane was set to 7'6" on these walls and of course the RCP was screwed up. We have fixed this three times by editing the wall styles and saving. But on restart and reopen the cut plane reverts back to 7'6".
> What...is going on?
Where exactly is it "reverting" in the wall style?
--
David Kurtz
Peckham & Wright Architects, Inc.
Columbia, Missouri
Thanks, all.
It is reverting in the display override. We set it to 3' 6" and then come back later and it's back to 7' 6".
We don't typically use standards but I'll check this one out.
Our tech has redrawn the exterior walls using our standard wall styles and apparently fixed the problem. It must be something within the wall style set up but I was under the impression that the display override would supercede that.
Oh well, I'll not fight success for now.
Thanks for your input.
