Autodesk Architectural Desktop 2007 & Prior

Autodesk Architectural Desktop 2007 & Prior

Reply
*Dodd, Vincent
Message 1 of 3 (46 Views)

Stair direction arrow

46 Views, 2 Replies
10-02-2002 10:12 PM
I tried to change the stair direction from up to down in entidy display by
turning off all the ups & turning on all the downs but it didnt work & my
other sets of stairs int the drawing dissapeared.
How do i just change 1 set of stairs?
*Addis, Reid M.
Message 2 of 3 (46 Views)

Re: Stair direction arrow

10-02-2002 10:48 PM in reply to: *Dodd, Vincent
Don't change this at the System or Style level.
Pick the stair, right click, go to Entity Display in the pop-up menu, 2nd
tab, then check the No box at the top item (Stair probably). Leave the lower
two (system and style level) alone. Then in Display props, GO WILD for that
stair only!

--
Regards,
---------------
Reid M. Addis
Architectural Applications Specialist
Granary Associates
411 North 20th Street
Philadelphia, PA 19130
Ph. 215-665-7056
email: addis@granaryassoc.com
"Vincent Dodd" wrote in message
news:1C0E4C97E4B79B684FF2DB86DE0D5D8A@in.WebX.maYIadrTaRb...
> I tried to change the stair direction from up to down in entidy display by
> turning off all the ups & turning on all the downs but it didnt work & my
> other sets of stairs int the drawing dissapeared.
> How do i just change 1 set of stairs?
>
>
*Browning, Mark
Message 3 of 3 (46 Views)

Re:

10-02-2002 11:15 PM in reply to: *Dodd, Vincent
Yes, but I don't think that answers the question about the "stair direction
arrow". I think you have to redraw the stair using the counter clockwise
option, instead of using the default clockwise direction. I don't think this
can be changed after the stair has been drawn. There are two little arrow
buttons next to the word Horizontal on the initial Add Stair dialogue box.
Not exactly an obvious label for this function.

- Mark

"Reid M. Addis" wrote in message
news:BCF510F775A70546A39019FC3B36492A@in.WebX.maYIadrTaRb...
> Don't change this at the System or Style level.
> Pick the stair, right click, go to Entity Display in the pop-up menu, 2nd
> tab, then check the No box at the top item (Stair probably). Leave the
lower
> two (system and style level) alone. Then in Display props, GO WILD for
that
> stair only!
>
> --
> Regards,
> ---------------
> Reid M. Addis
> Architectural Applications Specialist
> Granary Associates
> 411 North 20th Street
> Philadelphia, PA 19130
> Ph. 215-665-7056
> email: addis@granaryassoc.com
> "Vincent Dodd" wrote in message
> news:1C0E4C97E4B79B684FF2DB86DE0D5D8A@in.WebX.maYIadrTaRb...
> > I tried to change the stair direction from up to down in entidy display
by
> > turning off all the ups & turning on all the downs but it didnt work &
my
> > other sets of stairs int the drawing dissapeared.
> > How do i just change 1 set of stairs?
> >
> >
>
>
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.