Autodesk Architectural Desktop 2007 & Prior

Autodesk Architectural Desktop 2007 & Prior

Reply
Distinguished Contributor
phildlight
Posts: 249
Registered: ‎09-08-2004
Message 1 of 6 (2,283 Views)

snap to hatch?

2283 Views, 5 Replies
06-15-2005 11:31 AM
What is the variable to enable snaping to hatch lines and intersections?
Distinguished Contributor
calfcreek
Posts: 1,196
Registered: ‎03-03-2004
Message 2 of 6 (2,283 Views)

Re: snap to hatch?

06-15-2005 11:34 AM in reply to: phildlight
It is in the options/Drafting dialogue. There is a check box to 'ignore hatch objects'.

Keith D. Rodebush
SGAI
*Jeff Hanson
Message 3 of 6 (2,283 Views)

Re: snap to hatch?

06-15-2005 11:36 AM in reply to: phildlight
OSNAPHATCH (1)


--
jeff.hanson@autodesk.com
Product Support Analyst
Autodesk Product Support
Building Solutions Division

Autodesk Inc.
100 Commercial Street
Manchester, NH 03101
_______________________________

wrote in message news:4875940@discussion.autodesk.com...
What is the variable to enable snaping to hatch lines and intersections?
Distinguished Contributor
phildlight
Posts: 249
Registered: ‎09-08-2004
Message 4 of 6 (2,283 Views)

Re: snap to hatch?

06-15-2005 11:47 AM in reply to: phildlight
thanks Jeff. That should either be defaulted to ( 1 ) or more clearly found as an option. Floor tile pattern to dimension tiles or make sure your math is right.
*David Kurtz
Message 5 of 6 (2,283 Views)

Re: snap to hatch?

06-15-2005 11:48 AM in reply to: phildlight
phildlight wrote:
> What is the variable to enable snaping to hatch lines and intersections?


goto the drafting tab in options and hit the help button.


--
David Kurtz
Peckham & Wright Architects, Inc.
Columbia, Missouri
*David Kurtz
Message 6 of 6 (2,283 Views)

Re: snap to hatch?

06-15-2005 11:53 AM in reply to: phildlight
phildlight wrote:
> thanks Jeff. That should either be defaulted to ( 1 ) or more clearly found as an option. Floor tile pattern to dimension tiles or make sure your math is right.

I disagree on the default, but I do wish they would duplicate this, and
the display rep cut-plane (others?), down to the area next to zsnap. Or
on the bar with dimensions.

Has anyone ever posted this as a wish?

--
David Kurtz
Peckham & Wright Architects, Inc.
Columbia, Missouri
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.