Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
How can I represent a kitchen door - swings both ways?
What I do is insert 2 doors with opposite swings and just make one hidden
line type.
Dave Park
"rod standing" wrote in message
news:AD45F2417272034B60DE1E0E89297385@in.WebX.maYIadrTaRb...
> anybody have a style such as this that you can post to the CF, or provide
me
> with some guidance?
>
> thx
>
1) Edit the DoorStyle
2) Go to the "Design Rules" page
3) Choose Door Type "Single-Dhung" or "Double-Dhung"
That is what is intended for a door that swings both ways.
Jim Awe
Autodesk, Inc.
"rod standing" wrote in message
news:AD45F2417272034B60DE1E0E89297385@in.WebX.maYIadrTaRb...
> anybody have a style such as this that you can post to the CF, or provide
me
> with some guidance?
>
> thx
>
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")