Autodesk Architectural Desktop 2007 & Prior

Autodesk Architectural Desktop 2007 & Prior

Reply
Member
timothyj67
Posts: 4
Registered: ‎07-01-2003
Message 1 of 8 (44 Views)

cURVED ROOFS???

44 Views, 7 Replies
07-02-2002 07:57 AM
Hello
I would like to know how to make a curved roof or a domed roof ADT 3.3
I have searched the net and havent had that good of luck..
Please help in you can?
*Robert
Message 2 of 8 (44 Views)

Re: cURVED ROOFS???

07-02-2002 09:26 PM in reply to: timothyj67
Hi,
I'm not sure how this group reacts to advertising, but I've a curved roof
slab tool in a set of tools that my local dealer has designed and sells.
If you're interested, and it's permitted I'll pass on the info in here.

Regards.
Robert Mitchell
Tria NV
Belgium

I
"timothyj67" wrote in message
news:f0f225b.-1@WebX.maYIadrTaRb...
Hello
I would like to know how to make a curved roof or a domed roof ADT 3.3
I have searched the net and havent had that good of luck..
Please help in you can?
*Prettyman, Charles
Message 3 of 8 (44 Views)

Re:

07-03-2002 01:32 AM in reply to: timothyj67
I'm not sure what the actual rules are - although there is a MG just for NG
FAQ's that will explain it, but several independant 3rd party software
producers routinely post links - (This is where Rob jumps in) - to their
software when answering questions.


"Robert" wrote in message
news:43EC48B28977BF0BA57EB79EFFB48DD2@in.WebX.maYIadrTaRb...
> Hi,
> I'm not sure how this group reacts to advertising, but I've a curved roof
> slab tool in a set of tools that my local dealer has designed and sells.
> If you're interested, and it's permitted I'll pass on the info in here.
>
> Regards.
> Robert Mitchell
> Tria NV
> Belgium
>
> I
> "timothyj67" wrote in message
> news:f0f225b.-1@WebX.maYIadrTaRb...
> Hello
> I would like to know how to make a curved roof or a domed roof ADT 3.3
> I have searched the net and havent had that good of luck..
> Please help in you can?
>
>
*McLeod, James
Message 4 of 8 (44 Views)

Re:

07-03-2002 01:51 AM in reply to: timothyj67
Curved roofs are one thing, domes are another. Any curved roof can be
created using a closed polyline. Unfortunately the slab edges on these
curved roofs can be a little flakey to say the least
"Charles Prettyman" wrote in message
news:C65392819F775C6824D3674E4953C9F9@in.WebX.maYIadrTaRb...
> I'm not sure what the actual rules are - although there is a MG just for
NG
> FAQ's that will explain it, but several independant 3rd party software
> producers routinely post links - (This is where Rob jumps in) - to their
> software when answering questions.
>
>
> "Robert" wrote in message
> news:43EC48B28977BF0BA57EB79EFFB48DD2@in.WebX.maYIadrTaRb...
> > Hi,
> > I'm not sure how this group reacts to advertising, but I've a curved
roof
> > slab tool in a set of tools that my local dealer has designed and sells.
> > If you're interested, and it's permitted I'll pass on the info in here.
> >
> > Regards.
> > Robert Mitchell
> > Tria NV
> > Belgium
> >
> > I
> > "timothyj67" wrote in message
> > news:f0f225b.-1@WebX.maYIadrTaRb...
> > Hello
> > I would like to know how to make a curved roof or a domed roof ADT 3.3
> > I have searched the net and havent had that good of luck..
> > Please help in you can?
> >
> >
>
>
*Starz, Rob
Message 5 of 8 (44 Views)

Re:

07-03-2002 10:36 AM in reply to: timothyj67
no jumping in here. Beyond the dormer routine I don't touch Roofs. I don't
have too many requests for items like that. From what I have gotten back
from clients they don't use Roofs or Roof Slabs much.....

--
| Rob Starz
------------------------------------------------------
| president / dreamer
| Stardsign cad solutions
| 352.263.3786
| AEC Designer / Consultant / Developer
| Autodesk Architectural Desktop:
Tools: www.stardsign.com
Tech Support: www.stardsign.com/support.htm
Bring the Power of i-drop into AutoCAD with i-dock (coming soon)
*Robert
Message 6 of 8 (44 Views)

Re:

07-03-2002 09:00 PM in reply to: timothyj67
Sorry for the delay, here's the addy of the firm I've been dealing with.
http://www.technosoft.be/nl/ProdShow.asp?type=2&pid=52&cid=16

Actually that page should go direct to the section "Technotools" which
includes the curved roof , widowsills/lintels amongst other tools.
One slight hitch there though, you'll notice the page is in Dutch. I've just
been on the phone to them to ask them to hurry out the English PDF which
will obviously explain the tools more clearly.
They've promised to keep me informed and hope to get it done this week. I'll
post here or direct to anyone who's interested.

Regards.
Robert Mitchell
Tria NV
Belgium

"Robert" wrote in message
news:43EC48B28977BF0BA57EB79EFFB48DD2@in.WebX.maYIadrTaRb...
> Hi,
> I'm not sure how this group reacts to advertising, but I've a curved roof
> slab tool in a set of tools that my local dealer has designed and sells.
> If you're interested, and it's permitted I'll pass on the info in here.
>
> Regards.
> Robert Mitchell
> Tria NV
> Belgium
>
> I
> "timothyj67" wrote in message
> news:f0f225b.-1@WebX.maYIadrTaRb...
> Hello
> I would like to know how to make a curved roof or a domed roof ADT 3.3
> I have searched the net and havent had that good of luck..
> Please help in you can?
>
>
Member
Wendy03801
Posts: 4
Registered: ‎01-21-2004
Message 7 of 8 (44 Views)

Re:

01-21-2004 05:13 AM in reply to: timothyj67
Did you ever get anything in English on this?
Distinguished Contributor
a.c.childress
Posts: 1,874
Registered: ‎12-12-2003
Message 8 of 8 (44 Views)

Re:

01-21-2004 05:16 AM in reply to: timothyj67
I use roofs and roof slabs on every house I design. Search this group and the 2004 group using "barrel" as in "barrel vault" and that should bring up several examples. Look in the customer files area also.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.