AutoCAD Structural Detailing General DIscussion

AutoCAD Structural Detailing General DIscussion

Reply
Valued Contributor
Ievgen
Posts: 61
Registered: ‎06-26-2012
Message 1 of 5 (922 Views)
Accepted Solution

Reinforcement length in ASD 2013

922 Views, 4 Replies
10-25-2012 06:33 AM

Please help!

I want to change the maximum length of the rebar from 12m to 11.7m:

when I use command Reinforecment Elevation and try to set a single bar with a length of 40m (or smth like that) I am dealing with a dilemma: ASD tries to cut it in bars with 12m each.

On interface you can only steer one bar only by MOD_BAR_LAP (Lap splices in Modify).

In database it is up to the diameter bar so many of MaxLength to change is needed.

 

Product Support
Jakub.Brozonowicz
Posts: 317
Registered: ‎12-13-2010
Message 2 of 5 (912 Views)

Re: Reinforcement length in ASD 2013

10-25-2012 08:28 AM in reply to: Ievgen

MaxLength value in bar_??? database is set on 12.

(C:\ProgramData\Autodesk\Structural\Common Data\2013\Data\Reinf)

 



Jakub Brożonowicz
Valued Contributor
Ievgen
Posts: 61
Registered: ‎06-26-2012
Message 3 of 5 (909 Views)

Re: Reinforcement length in ASD 2013

10-25-2012 08:40 AM in reply to: Jakub.Brozonowicz

please specify what exact parameter I need to change. Is it possible to change with the ASD interface? 

Product Support
Jakub.Brozonowicz
Posts: 317
Registered: ‎12-13-2010
Message 4 of 5 (888 Views)

Re: Reinforcement length in ASD 2013

10-26-2012 03:25 AM in reply to: Ievgen

On interface you can only steer one bar only by MOD_BAR_LAP (Lap splices in Modify).

In database it is up to the diameter bar so many of MaxLength to change is needed.

 



Jakub Brożonowicz
New Member
graneeshakasunsi
Posts: 1
Registered: ‎04-11-2013
Message 5 of 5 (381 Views)

Re: Reinforcement length in ASD 2013

04-11-2013 06:56 AM in reply to: Jakub.Brozonowicz

I want to change the max length to 6m. but it can't be done in the interface as mentioned above. couldn't either edit the source cords. pls clearly mention what should I do?

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Structural Detailing Category!

The AutoCAD Structural Detailing forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.