AutoCAD Structural Detailing Forum
Welcome to Autodesk’s AutoCAD Structural Detailing Forums. Share your knowledge, ask questions, and explore popular AutoCAD Structural Detailing topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Reinforcement length in ASD 2013

4 REPLIES 4
SOLVED
Reply
Message 1 of 5
Ievgen
2489 Views, 4 Replies

Reinforcement length in ASD 2013

Please help!

I want to change the maximum length of the rebar from 12m to 11.7m:

when I use command Reinforecment Elevation and try to set a single bar with a length of 40m (or smth like that) I am dealing with a dilemma: ASD tries to cut it in bars with 12m each.

4 REPLIES 4
Message 2 of 5
Jakub.Brozonowicz
in reply to: Ievgen

MaxLength value in bar_??? database is set on 12.

(C:\ProgramData\Autodesk\Structural\Common Data\2013\Data\Reinf)

 



Jakub Brożonowicz

Global Product Support

Message 3 of 5
Ievgen
in reply to: Jakub.Brozonowicz

please specify what exact parameter I need to change. Is it possible to change with the ASD interface? 

Message 4 of 5
Jakub.Brozonowicz
in reply to: Ievgen

On interface you can only steer one bar only by MOD_BAR_LAP (Lap splices in Modify).

In database it is up to the diameter bar so many of MaxLength to change is needed.

 



Jakub Brożonowicz

Global Product Support

Message 5 of 5

I want to change the max length to 6m. but it can't be done in the interface as mentioned above. couldn't either edit the source cords. pls clearly mention what should I do?

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

”Boost

 

”Tips