AutoCAD Structural Detailing General DIscussion

AutoCAD Structural Detailing General DIscussion

Reply
Valued Contributor
rodainnajjar1229
Posts: 61
Registered: ‎07-26-2011
Message 1 of 5 (893 Views)
Accepted Solution

problem( robot to asd)

893 Views, 4 Replies
10-09-2012 06:56 AM

dear all

kindly find attached the 3 outputs of the same beam.

In dxf output and ASD output ,the beam is not the same as in robot output.

Please advise.

 

Any chance for getting the RTD file to test?

Hi,

 

Facing some problems too.

 

What is the RSA template that you used? I'm finding very dificult to find a template that shows all the beam elevation in one sheet (all spans including cantilivers) and sections in the same layout.

 

Thank You,

 

Sílvio Gonçalves

Product Support
Jakub.Brozonowicz
Posts: 317
Registered: ‎12-13-2010
Message 2 of 5 (891 Views)

Re: problem( robot to asd)

10-09-2012 07:32 AM in reply to: rodainnajjar1229

What you mean by "not the same beam"?

I see some reinforcement differences but nothing critical in it.



Jakub Brożonowicz
Valued Contributor
rodainnajjar1229
Posts: 61
Registered: ‎07-26-2011
Message 3 of 5 (874 Views)

sirRe: problem( robot to asd)

10-09-2012 11:57 PM in reply to: Jakub.Brozonowicz

dear sir

i mean the reinforcement of beams is different, why ?

,what option i have to do for  best exporting  between robor and asd.

regards

Product Support
Jakub.Brozonowicz
Posts: 317
Registered: ‎12-13-2010
Message 4 of 5 (869 Views)

Re: sirRe: problem( robot to asd)

10-10-2012 12:28 AM in reply to: rodainnajjar1229

Any chance for getting the RTD file to test?



Jakub Brożonowicz
Member
Sigo17
Posts: 5
Registered: ‎09-21-2011
Message 5 of 5 (375 Views)

Re: problem( robot to asd)

03-14-2013 12:30 PM in reply to: rodainnajjar1229

Hi,

 

Facing some problems too.

 

What is the RSA template that you used? I'm finding very dificult to find a template that shows all the beam elevation in one sheet (all spans including cantilivers) and sections in the same layout.

 

Thank You,

 

Sílvio Gonçalves

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Structural Detailing Category!

The AutoCAD Structural Detailing forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.