AutoCAD Structural Detailing General DIscussion

AutoCAD Structural Detailing General DIscussion

Reply
Member
xaut818
Posts: 3
Registered: ‎08-27-2012
Message 1 of 5 (1,093 Views)
Accepted Solution

Plant 3D or Revit talk to Structural Detailing??

1093 Views, 4 Replies
08-27-2012 02:33 AM

Do someone konw how Plant 3D or Revit talk to Structural Detailing??

I tried .dwg or .dxf files in Detailing, which are exported from Plant 3D or Revit. However, the member properties (the size, etc.) are missing.

 

The Structural Detailing introduction tells: " A structural Steel model created in Autodesk Revit Structure can be exported to AutoCAD Structural Detaling via CIS/2 file to complete all of the steel connection modelling and detailing, and automaticlly creat fabrication shop drawings.".

I don't know what the CIS/2 file means what. Can someone help?

 

 Regards

First: download Revit Extension from Subscription or any place.

After install: Revit, Extensions, ASD....then you must designate which sections will be used

See below the attached

*Expert Elite*
dave.wolfe
Posts: 711
Registered: ‎12-04-2009
Message 2 of 5 (1,091 Views)

Re: Plant 3D or Revit talk to Structural Detailing??

08-27-2012 04:28 AM in reply to: xaut818

For subscription customers, there is a Revit Extensions pack that includes an Export to Structural Detailing.

Dave Wolfe
Isaiah 57:15

ECAD, Inc.
Tips and Tricks on our blog: Process Design, from the Outside

A P3D Authorized Reseller
Plant 3d Wish list: https://plant3d.uservoice.com/
Valued Contributor
jorgeluisgdeaca
Posts: 74
Registered: ‎03-12-2012
Message 3 of 5 (1,085 Views)

Re: Plant 3D or Revit talk to Structural Detailing??

08-27-2012 05:07 AM in reply to: xaut818

First: download Revit Extension from Subscription or any place.

After install: Revit, Extensions, ASD....then you must designate which sections will be used

See below the attached

Member
xaut818
Posts: 3
Registered: ‎08-27-2012
Message 4 of 5 (998 Views)

Re: Plant 3D or Revit talk to Structural Detailing??

09-03-2012 09:15 PM in reply to: jorgeluisgdeaca

Thanks for ur help

Valued Contributor
jorgeluisgdeaca
Posts: 74
Registered: ‎03-12-2012
Message 5 of 5 (980 Views)

Re: Plant 3D or Revit talk to Structural Detailing??

09-04-2012 10:40 AM in reply to: xaut818

you're welcome

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Structural Detailing Category!

The AutoCAD Structural Detailing forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.