AutoCAD Structural Detailing General DIscussion

AutoCAD Structural Detailing General DIscussion

Reply
Active Member
6 Posts
0 Kudos
Registered: ‎07-30-2012
Post 1 of 10
Accepted Solution

Macros

1150 Views, 9 Replies
08-25-2012 06:21 AM

I used the base plate macro and made a elongated cap plate with holes. It seems to work ok on one column line, but It needs it to mirrored on the opposite column line. It's not working, what am I doing wrong. HELP.

Look at movie here.

---------------------------------------------
If this post answer your question please click "Accept as Solution". It will help everyone to find answer more quickly!

Valued Contributor
69 Posts
7 Kudos
Registered: ‎03-04-2010
Post 2 of 10

Re: Macros

08-29-2012 03:12 AM in reply to: jpassociates

Please add some pictures.

 

Mirror command only works in XY plane!!!

Active Member
6 Posts
0 Kudos
Registered: ‎07-30-2012
Post 3 of 10

Macros

08-29-2012 06:13 PM in reply to: jpassociates

I am using the the base plate macro. I am trying to have a 2-hole on 1-side 6" apart and at 90 deg. 2-more holes 6" apart 18"x18"x1 1/4" PL. I got it to work one side but i couldn't on the 90 deg. side. Thanks 

Valued Mentor
526 Posts
65 Kudos
Registered: ‎08-19-2008
Post 4 of 10

Re: Macros

08-30-2012 04:27 PM in reply to: jpassociates

from what I have seen, ASD does not play well with the mirror command

CAD Management 101:
You can do it your own way,
If its done just how I say!
[Metallica:And Justice For All:1988]
Active Member
6 Posts
0 Kudos
Registered: ‎07-30-2012
Post 5 of 10

Re: Macros

08-31-2012 05:24 AM in reply to: jpassociates

If I can't use this base plate macro for this particular plate. Could I use the plate macro and add holes where I need them? If so, How would this work.  

Product Support
317 Posts
32 Kudos
Registered: ‎12-13-2010
Post 6 of 10

Re: Macros

08-31-2012 07:20 AM in reply to: jpassociates

Do you have any chance to show it please?



Jakub Brożonowicz
Active Member
6 Posts
0 Kudos
Registered: ‎07-30-2012
Post 7 of 10

Re: Macros

08-31-2012 09:41 AM in reply to: jpassociates
Product Support
317 Posts
32 Kudos
Registered: ‎12-13-2010
Post 8 of 10

Re: Macros

09-03-2012 03:14 AM in reply to: jpassociates

Look at movie here.

---------------------------------------------
If this post answer your question please click "Accept as Solution". It will help everyone to find answer more quickly!



Jakub Brożonowicz
Active Member
6 Posts
0 Kudos
Registered: ‎07-30-2012
Post 9 of 10

Re: Macros

09-04-2012 05:19 AM in reply to: jpassociates

Thanks for the solution.

Active Member
6 Posts
0 Kudos
Registered: ‎07-30-2012
Post 10 of 10

Re: Macros

09-12-2012 04:05 AM in reply to: Jakub.Brozonowicz
Holes needed at clouded area. With all the hole variations for that base plate macro, I can't get it to show those clouded holes. Help please.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Structural Detailing Category!

The AutoCAD Structural Detailing forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.