AutoCAD Structural Detailing General DIscussion

AutoCAD Structural Detailing General DIscussion

Reply
Valued Contributor
Priitl220
Posts: 87
Registered: ‎05-23-2007
Message 1 of 7 (616 Views)

Dimensioning Styles: assembly and group - detailed view

616 Views, 6 Replies
01-23-2013 11:26 AM

If you use any of dimensioning styles from Group or Assemblies there is a tab "Detailed View".

23.01.2013 , 21_16_27.png

How could I use it?

If I add Cross-section/Detailed View to template - it uses settings from "Front view " instead.

23.01.2013 , 21_18_18.png

In properties it shows that ype is some mysterious "Custom View? (it should be "Detailed View" I think).

23.01.2013 , 21_23_09.png

How could I change it to use setings from tab "Detailed View"?

____________________________________________
If you find my post useful give me Kudos. Thank you!
If my post solved your problem, accept it as a solution.
Active Contributor
talles.projetos
Posts: 38
Registered: ‎03-20-2012
Message 2 of 7 (600 Views)

Re: Dimensioning Styles: assembly and group - detailed view

01-23-2013 05:06 PM in reply to: Priitl220

In plant. In front view and side view. You can use the keyboard command RBCS_ADDDETAILVIEW. Within any order to generate the detail view.

Was it?

 

Att
Talles

 

 

Valued Contributor
Priitl220
Posts: 87
Registered: ‎05-23-2007
Message 3 of 7 (593 Views)

Re: Dimensioning Styles: assembly and group - detailed view

01-23-2013 10:46 PM in reply to: talles.projetos

Thank you for your effort, but this was not what I was looking for.

 

I know how to make cuts and details- I just need them to use the right style- not to change style one by one view.

____________________________________________
If you find my post useful give me Kudos. Thank you!
If my post solved your problem, accept it as a solution.
*Expert Elite*
StefanoPasquini6790
Posts: 293
Registered: ‎07-06-2011
Message 4 of 7 (586 Views)

Re: Dimensioning Styles: assembly and group - detailed view

01-24-2013 02:09 AM in reply to: Priitl220

Good morning,

 

it's easy,

 

step 1) you have to create your personalized template with a detailed view (see picture below)

 

Cattura2.JPG

 

 

step 2) you have to select automatic cut in the format and scale label of the outomatic drawing command (see picture below)

 

Cattura.JPG

 

and this is the automaic drawing result

 

Cattura3.JPG

 

bye


PasProStudio

Structural + Detailing engineers
Valued Contributor
Priitl220
Posts: 87
Registered: ‎05-23-2007
Message 5 of 7 (558 Views)

Re: Dimensioning Styles: assembly and group - detailed view

01-24-2013 10:40 PM in reply to: StefanoPasquini6790

Thank you - but this was not it.

This option (you showed) only states where the section marks are shown - not the style of cuts.

 

(I know how to make templates.)

 

Try this. Activate the new section and click "Adjust Style" - What do you see?

25.01.2013_002_ver001.png

 

____________________________________________
If you find my post useful give me Kudos. Thank you!
If my post solved your problem, accept it as a solution.
Mentor
zcsillag
Posts: 246
Registered: ‎02-01-2008
Message 6 of 7 (521 Views)

Re: Dimensioning Styles: assembly and group - detailed view

01-27-2013 02:09 AM in reply to: Priitl220

Check this

Regards
Csillag Zoltán
Valued Contributor
Priitl220
Posts: 87
Registered: ‎05-23-2007
Message 7 of 7 (479 Views)

Re: Dimensioning Styles: assembly and group - detailed view

01-27-2013 11:42 PM in reply to: zcsillag

Thank you. I do it like that, but I would like it to use the correct tab from same style.

 

You can do it by changing dimensiong style views one by one from general to detailed. Then it uses the settings from detailed tab.

28.01.2013_002_ver001.png

 

But to change all views one by one is too tedious work, 

 

So I should be able to set this via template.

 

Wishlist item or Bug?

____________________________________________
If you find my post useful give me Kudos. Thank you!
If my post solved your problem, accept it as a solution.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Structural Detailing Category!

The AutoCAD Structural Detailing forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!