AutoCAD Structural Detailing General DIscussion

AutoCAD Structural Detailing General DIscussion

Reply
Active Member
danielledew
Posts: 9
Registered: ‎11-11-2008
Message 1 of 8 (1,091 Views)

Criteria of Connections?

1091 Views, 7 Replies
10-18-2010 01:16 AM

I'm trying to do a two beams to column web connection, but when I select the relevant beams and column it tells me,  “Selected profiles does not meet criteria of this type of connection”. The beams are Universal Beams and the column is a Universal Column, so there's no reason why it SHOULDN'T work.

 

Is there a document anywhere stating what the "criteria" is?

 

 

Member
M_Azab
Posts: 3
Registered: ‎07-22-2012
Message 2 of 8 (722 Views)

Re: Criteria of Connections?

07-22-2012 05:47 AM in reply to: danielledew

i have the same problem

Contributor
kylepope
Posts: 23
Registered: ‎12-06-2006
Message 3 of 8 (701 Views)

Re: Criteria of Connections?

07-23-2012 02:09 PM in reply to: danielledew

I've tested this out a couple times, without any problems yet.  Could you post up a screen shot or two of your current structure so I can more accurately duplicate it?

 

To my knowledge, I don't believe there is any criteria published beyond what is in the description.

Kyle Pope
Process and Power Specialist
ECAD, Inc

Our Blog
www.pdoteam.com
Product Support
Jakub.Brozonowicz
Posts: 317
Registered: ‎12-13-2010
Message 4 of 8 (693 Views)

Re: Criteria of Connections?

07-24-2012 06:40 AM in reply to: kylepope

Maybe the angle between members is that criteria which accurately is not passed.

I'm able to answer (not guessing only) with true model sample.

---------------------------------------------
If this post answer your question please click "Accept as Solution". It will help everyone to find answer more quickly!



Jakub Brożonowicz
Member
M_Azab
Posts: 3
Registered: ‎07-22-2012
Message 5 of 8 (684 Views)

Re: Criteria of Connections?

07-26-2012 01:24 AM in reply to: M_Azab

i faced this prolem when i use the connection column to rafter as shown in attached photo

Product Support
Jakub.Brozonowicz
Posts: 317
Registered: ‎12-13-2010
Message 6 of 8 (674 Views)

Re: Criteria of Connections?

07-26-2012 03:43 AM in reply to: M_Azab

To make this connection possible to make due to such criteria you need to rotate column by 90deg.

---------------------------------------------
If this post answer your question please click "Accept as Solution". It will help everyone to find answer more quickly!



Jakub Brożonowicz
Member
M_Azab
Posts: 3
Registered: ‎07-22-2012
Message 7 of 8 (671 Views)

Re: Criteria of Connections?

07-26-2012 04:59 AM in reply to: Jakub.Brozonowicz

the column and rafter have the same section therefore no need to rotate it

Distinguished Contributor
CristianLANCULESCU1367
Posts: 103
Registered: ‎11-02-2011
Message 8 of 8 (649 Views)

Re: Criteria of Connections?

07-30-2012 07:11 AM in reply to: danielledew

danielledew wrote:

I'm trying to do a two beams to column WEB connection, but when I select the relevant beams and column it tells me,  “Selected profiles does not meet criteria of this type of connection”. The beams are Universal Beams and the column is a Universal Column, so there's no reason why it SHOULDN'T work.

 

Is there a document anywhere stating what the "criteria" is?

 

 

 


 The beam web is parallel to the column's web. That's why it doesn't work.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Structural Detailing Category!

The AutoCAD Structural Detailing forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.