AutoCAD Structural Detailing General DIscussion

AutoCAD Structural Detailing General DIscussion

Reply
Active Member
job_delacruz
Posts: 7
Registered: ‎07-23-2012
Message 1 of 3 (534 Views)
Accepted Solution

Connection Shearplate - Beam_column web at an Angle

534 Views, 2 Replies
07-23-2012 08:59 PM

Hi,

 

The "Connection Shearplate - Beam_column web"  does not work when the beam is connecting to the column in an angle postion. What is the work around? Or is there any other connection type that can be use with this situation?

 

Please see attach picture below for reference:

 Connection Shearplate - Beam_column web at an Angle.png

 

Thanks,

Job

Product Support
Jakub.Brozonowicz
Posts: 317
Registered: ‎12-13-2010
Message 2 of 3 (521 Views)

Re: Connection Shearplate - Beam_column web at an Angle

07-24-2012 06:21 AM in reply to: job_delacruz

It is possible only for very small angle positions ~1 degree.

Only manual adjusting is possible for bigger angles.

---------------------------------------------
If this post answer your question please click "Accept as Solution". It will help everyone to find answer more quickly!



Jakub Brożonowicz
Active Member
job_delacruz
Posts: 7
Registered: ‎07-23-2012
Message 3 of 3 (508 Views)

Re: Connection Shearplate - Beam_column web at an Angle

07-25-2012 06:13 PM in reply to: Jakub.Brozonowicz

Ok, noted. Can you show me an example of the manual adjustment if the column rotate more than 1 degrees.

 

Job

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Structural Detailing Category!

The AutoCAD Structural Detailing forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.