AutoCAD Structural Detailing General DIscussion

AutoCAD Structural Detailing General DIscussion

Reply
Contributor
RedNova
Posts: 17
Registered: ‎01-30-2013
Message 1 of 5 (913 Views)
Accepted Solution

Automatic Drawings Generation: Bill of Materials not displayed

913 Views, 4 Replies
02-25-2013 06:49 AM

Hi.

I am trying to adopt automatic drawings generation to my needs.

It looks like there is a some bug about Bill of Materials in automatic drawings dialog.

Nevermind if I I place mark on "Add nomenclature" box or not, the bill of material will never uppear on the generated drawing. Also it doesn't depend in which corner I try to put it.

I tryed with many tamplates which are included in ASD. Nothing helped.

ASD 2013, SP1.

Hope to find support here.

 

Now I understood the reason ))).

I was trying to add Bill of Materials to a drawing of single part and it didn't work. But it works when I do this for Assembly. So I guess this function is not applicable to single part drawings.

Contributor
RedNova
Posts: 17
Registered: ‎01-30-2013
Message 2 of 5 (871 Views)

Re: Automatic Drawings Generation: Bill of Materials not displayed

02-25-2013 09:13 PM in reply to: RedNova

At least is this just me with this problem or everybody have it?

See more detailed screenshot explanation belowdrawing generated without BOM.jpg

Active Member
mclarenforever
Posts: 6
Registered: ‎08-12-2011
Message 3 of 5 (856 Views)

Re: Automatic Drawings Generation: Bill of Materials not displayed

02-26-2013 03:53 AM in reply to: RedNova
Contributor
RedNova
Posts: 17
Registered: ‎01-30-2013
Message 4 of 5 (821 Views)

Re: Automatic Drawings Generation: Bill of Materials not displayed

02-26-2013 09:36 PM in reply to: RedNova

Now I understood the reason ))).

I was trying to add Bill of Materials to a drawing of single part and it didn't work. But it works when I do this for Assembly. So I guess this function is not applicable to single part drawings.

Valued Contributor
tony
Posts: 62
Registered: ‎02-08-2011
Message 5 of 5 (773 Views)

Re: Automatic Drawings Generation: Bill of Materials not displayed

02-28-2013 04:01 AM in reply to: RedNova

yes you are right BOM at this stage is not available for sigle parts

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Structural Detailing Category!

The AutoCAD Structural Detailing forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.