AutoCAD Structural Detailing General DIscussion

AutoCAD Structural Detailing General DIscussion

Reply
Active Contributor
tpham2001
Posts: 29
Registered: ‎07-16-2012
Message 1 of 4 (424 Views)

Assembly call out on Engineering Drawing.

424 Views, 3 Replies
09-04-2013 08:15 AM

Hi All,

I have drawing with assembly parts c/w assigned position (ie, beam with shear plate on one end and double angle on the other). I generated the engineering drawing, it doesn't show the assembly call out. Just the profile of the components call out. why and how do I fix this?

 

Thank-you,

 

Tee

 

 

Valued Contributor
Jianna
Posts: 77
Registered: ‎04-21-2012
Message 2 of 4 (420 Views)

Re: Assembly call out on Engineering Drawing.

09-04-2013 08:51 AM in reply to: tpham2001

On the ribbon go to "ASD - Drawings", then under the "Drawings Edition" section you'll find a button that says "Insert assembly label". Hopefully this is what you're looking for.

assembly label.png


Active Contributor
tpham2001
Posts: 29
Registered: ‎07-16-2012
Message 3 of 4 (400 Views)

Re: Assembly call out on Engineering Drawing.

09-05-2013 05:17 AM in reply to: Jianna

This is what I did and it still does not show the position of the assembly.

Please see attachments. C8x11.5 is an assembly consisting of shear plates at each end. when Insert Assembly Label, I'm presented with a dialog box and I selected what I want but at last, no position (E13020 B 102).

 

What and where did I go wrong?

 

Oh, and how do I insert a screen shots or clippings into email body instead of attaching file.

 

Valued Contributor
Jianna
Posts: 77
Registered: ‎04-21-2012
Message 4 of 4 (368 Views)

Re: Assembly call out on Engineering Drawing.

09-05-2013 11:31 AM in reply to: tpham2001

Below is how to insert a picture. I'm working on some other stuff at the moment, but when I have a spare minute (and if someone else hasn't helped you by then) I'll see what I can do to help you out with the assembly label.

insert pic.png

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Structural Detailing Category!

The AutoCAD Structural Detailing forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!