AutoCAD Structural Detailing General DIscussion

AutoCAD Structural Detailing General DIscussion

Reply
Active Contributor
Delvin.Ramassami
Posts: 33
Registered: ‎03-18-2013
Message 1 of 4 (486 Views)
Accepted Solution

A workshop drawing of all Angle plates - Filtering

486 Views, 3 Replies
03-22-2013 04:03 AM

Possible to have an assembly drawing without displaying the angles plates ? A worhshop drawing containing all angles plates only ?

 

For the first part , what you mean ; that is when auto drawings in the position tab (object inspector ) to have the parts selected with at the top header having profiles and part too selected ?

 

you should only select Part Profile (p) and Plates (pl) on Position of Object inspector. 

then do Auto Drawing of those selcted, but take note of changing the Mode to (Many position) System will then arrange Plates in one page and profiles on separate page.

 

Valued Contributor
HulelaG
Posts: 54
Registered: ‎09-07-2011
Message 2 of 4 (479 Views)

Re: A workshop drawing of all Angle plates - Filtering

03-22-2013 04:30 AM in reply to: Delvin.Ramassami

THEmost useful feature of ASD, yes you can.

when you start you automatic Drawings,first choose parts/profile you want to make auto drawings including plates

ASD will arrange plates in 1 or more drawing and then Profiles detailed.

 

and Auto'drawings dialogue box, > Arrange Views> Mode, Select Multiple Possition. and generate Drawings.

 

I hope it helps sort your problem?

 

Active Contributor
Delvin.Ramassami
Posts: 33
Registered: ‎03-18-2013
Message 3 of 4 (470 Views)

Re: A workshop drawing of all Angle plates - Filtering

03-22-2013 05:01 AM in reply to: Delvin.Ramassami

 

For the first part , what you mean ; that is when auto drawings in the position tab (object inspector ) to have the parts selected with at the top header having profiles and part too selected ?

 

Valued Contributor
HulelaG
Posts: 54
Registered: ‎09-07-2011
Message 4 of 4 (442 Views)

Re: A workshop drawing of all Angle plates - Filtering

03-24-2013 10:57 PM in reply to: Delvin.Ramassami

you should only select Part Profile (p) and Plates (pl) on Position of Object inspector. 

then do Auto Drawing of those selcted, but take note of changing the Mode to (Many position) System will then arrange Plates in one page and profiles on separate page.

 

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Structural Detailing Category!

The AutoCAD Structural Detailing forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!