AutoCAD Structural Detailing General DIscussion

AutoCAD Structural Detailing General DIscussion

Reply
Active Contributor
Delvin.Ramassami
Posts: 33
Registered: ‎03-18-2013
Message 1 of 4 (473 Views)
Accepted Solution

A workshop drawing of all Angle plates - Filtering

473 Views, 3 Replies
03-22-2013 04:03 AM

Possible to have an assembly drawing without displaying the angles plates ? A worhshop drawing containing all angles plates only ?

 

For the first part , what you mean ; that is when auto drawings in the position tab (object inspector ) to have the parts selected with at the top header having profiles and part too selected ?

 

you should only select Part Profile (p) and Plates (pl) on Position of Object inspector. 

then do Auto Drawing of those selcted, but take note of changing the Mode to (Many position) System will then arrange Plates in one page and profiles on separate page.

 

Valued Contributor
HulelaG
Posts: 54
Registered: ‎09-07-2011
Message 2 of 4 (466 Views)

Re: A workshop drawing of all Angle plates - Filtering

03-22-2013 04:30 AM in reply to: Delvin.Ramassami

THEmost useful feature of ASD, yes you can.

when you start you automatic Drawings,first choose parts/profile you want to make auto drawings including plates

ASD will arrange plates in 1 or more drawing and then Profiles detailed.

 

and Auto'drawings dialogue box, > Arrange Views> Mode, Select Multiple Possition. and generate Drawings.

 

I hope it helps sort your problem?

 

Active Contributor
Delvin.Ramassami
Posts: 33
Registered: ‎03-18-2013
Message 3 of 4 (457 Views)

Re: A workshop drawing of all Angle plates - Filtering

03-22-2013 05:01 AM in reply to: Delvin.Ramassami

 

For the first part , what you mean ; that is when auto drawings in the position tab (object inspector ) to have the parts selected with at the top header having profiles and part too selected ?

 

Valued Contributor
HulelaG
Posts: 54
Registered: ‎09-07-2011
Message 4 of 4 (429 Views)

Re: A workshop drawing of all Angle plates - Filtering

03-24-2013 10:57 PM in reply to: Delvin.Ramassami

you should only select Part Profile (p) and Plates (pl) on Position of Object inspector. 

then do Auto Drawing of those selcted, but take note of changing the Mode to (Many position) System will then arrange Plates in one page and profiles on separate page.

 

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Structural Detailing Category!

The AutoCAD Structural Detailing forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.