AutoCAD Raster Design General Discussion

AutoCAD Raster Design General Discussion

Reply
*Trudel, JP
Message 1 of 4 (287 Views)

Shift key with Raster Design

287 Views, 3 Replies
08-25-2003 02:34 AM
Hello,

deos some of you had experiment a promblem with shift key to select multiple
grips or unselect object ?

JP
*Fuls, Karl
Message 2 of 4 (287 Views)

Re: Shift key with Raster Design

08-25-2003 04:13 PM in reply to: *Trudel, JP
I believe the shift-pick combo will select the image if you pick inside it's
boundary. This does allow you to select an image without zooming out so you can
see it's boundary but it does conflict with other uses of this combination.

_____________
Karl M. Fuls PLS
AEC Training and Consulting
Assistant Moderator - Autodesk Discussion Forums

Please state the version of your software and the operating system you are using
to facilitate better replies.


JP Trudel wrote:

> Hello,
>
> deos some of you had experiment a promblem with shift key to select multiple
> grips or unselect object ?
>
> JP
*Jessup, Allen
Message 3 of 4 (287 Views)

Re:

08-25-2003 10:15 PM in reply to: *Trudel, JP
This can be controlled through the options in RD. Go to Mouse Settings on
the User Preferences tab.

Allen

"Karl Fuls" wrote in message
news:3F4B0894.F216C34D@adelphia.net...
> I believe the shift-pick combo will select the image if you pick inside
it's
> boundary. This does allow you to select an image without zooming out so
you can
> see it's boundary but it does conflict with other uses of this
combination.
>
> _____________
> Karl M. Fuls PLS
> AEC Training and Consulting
> Assistant Moderator - Autodesk Discussion Forums
>
> Please state the version of your software and the operating system you are
using
> to facilitate better replies.
>
>
> JP Trudel wrote:
>
> > Hello,
> >
> > deos some of you had experiment a promblem with shift key to select
multiple
> > grips or unselect object ?
> >
> > JP
>
>
>
*Trudel, JP
Message 4 of 4 (287 Views)

Re:

08-26-2003 08:37 AM in reply to: *Trudel, JP
Thank's

JP

"Karl Fuls" a écrit dans le message de news:
3F4B0894.F216C34D@adelphia.net...
> I believe the shift-pick combo will select the image if you pick inside
it's
> boundary. This does allow you to select an image without zooming out so
you can
> see it's boundary but it does conflict with other uses of this
combination.
>
> _____________
> Karl M. Fuls PLS
> AEC Training and Consulting
> Assistant Moderator - Autodesk Discussion Forums
>
> Please state the version of your software and the operating system you are
using
> to facilitate better replies.
>
>
> JP Trudel wrote:
>
> > Hello,
> >
> > deos some of you had experiment a promblem with shift key to select
multiple
> > grips or unselect object ?
> >
> > JP
>
>
>
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Raster Design Category!

The AutoCAD Raster Design forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.