Fellow Autodesk RD Users,
I have been trying to open Image Manager in my RD 2013 installation but in vain!!! Any help?
I have deployed RD on top of Civil 3d 2013 and NO nothing appears in the Toolspace...Am I missing something?
Any and all help will be greatly appreciated!!
Thanx in advance!
Actually, here is what i did:
I installed Rater Design with Civil 3D as the "Core Product".
However, I wanted Raster Design to start as part of the regular Civil 3D Workspace, so I added the relevant paths and GUI components to the standard installation. That is my goal, so I need to know what other tweaks I have to do to make it work (I am sure it is doable, noone can convince me otherwise).
HOWEVER, even when running it through thw provided icon, Image Manager does not run in any way (prompt or ribbon). So are there any other ideas besides the obvious (and plz don't advise me to uninstall and reinstall, I don't think that will change anything).
Thanx a lot!!
Cuiload -> On this display see if AUTOCADRASTERDESIGN is loaded.
If not browse to your Rasterdesign installation directory several layers and locate AecCo.cuix.
Load that file.
Do the first two Tutorials under the Raster section.
I have tried your suggestions. You seem familiar with RD and your advice is well received. However, it doesn't work for me
The first part of your suggestions was done with no problems. AUTOCADRASTERDESIGN is loaded when I run Cuiload as expected.
When I started doing the tutorials though, I could not open the Image Manager for exercise A2, with any of the proposed methods.
It seems like the only options are for me to uninstall RD and re-install it properly, or do something else to fix the issue. Can you advise me how to do these properly?
Thanx again for your prompt and thorough response!!
Access a broad range of knowledge to help get the most out of your products and services.
Start with some of our most frequented solutions to get help installing your software.
The AutoCAD Raster Design forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.
Upgrading to a 2015 product? Make sure to check these out 1st!