AutoCAD Raster Design General Discussion

AutoCAD Raster Design General Discussion

Reply
Valued Mentor
awood
Posts: 315
Registered: ‎06-24-2005
Message 1 of 10 (2,767 Views)

Raster Design 2013 and MrSID Generation 4

2767 Views, 9 Replies
04-05-2012 10:22 AM

Does anyone know if Raster Design 2013 will support the fairly new MrSID Generation 4 (mg4) imagery?

Thanks,

AWood

Contributor
DMillerAmCan
Posts: 11
Registered: ‎01-28-2009
Message 2 of 10 (2,749 Views)

Re: Raster Design 2013 and MrSID Generation 4

04-11-2012 01:54 PM in reply to: awood

Not Sure but my Raster Design 2013 crashes when I try to load a MrSID

Contributor
DMillerAmCan
Posts: 11
Registered: ‎01-28-2009
Message 3 of 10 (2,734 Views)

Re: Raster Design 2013 and MrSID Generation 4

04-16-2012 11:51 AM in reply to: awood

Its been a week now and Autodesk still has no answer why Raster Design 2013 Crashes when trying to open a MrSID

Contributor
DMillerAmCan
Posts: 11
Registered: ‎01-28-2009
Message 4 of 10 (2,693 Views)

Re: Raster Design 2013 and MrSID Generation 4

05-01-2012 03:03 PM in reply to: DMillerAmCan
Its now been 2 weeks. Autodesk development is looking into why my system Crashes when I "ADD" or attempt to add imagery (in .sid) through the Map Work Space interface. I am running Raster Design 2013 and it wont open a stand alone copy of any of my new MrSID Files. Possible may be due to the 4th Band CIR (infra Red). Still waiting and not working
Valued Contributor
derek.gray
Posts: 51
Registered: ‎12-20-2006
Message 5 of 10 (2,083 Views)

Re: Raster Design 2013 and MrSID Generation 4

11-20-2012 06:32 AM in reply to: DMillerAmCan

I am also looking for supported generations (4) of MrSid in Raster2013... I would think that should be easy to find out.. not so much it seems....

Valued Mentor
Hidden_Brain
Posts: 701
Registered: ‎03-24-2009
Message 6 of 10 (1,127 Views)

Re: Raster Design 2013 and MrSID Generation 4

09-03-2013 09:27 AM in reply to: derek.gray

was there any resolution to this?

thanks

Avishek Chhibber, P.E., CFM
Civil 3D 2013 SP2, Win 7-64 bit
8GB RAM
Valued Contributor
derek.gray
Posts: 51
Registered: ‎12-20-2006
Message 7 of 10 (1,126 Views)

Re: Raster Design 2013 and MrSID Generation 4

09-03-2013 09:35 AM in reply to: Hidden_Brain
I worked around it by using Lizardtech's Geoviewer to save them as tiff's... not ideal, but it worked for my issue...
Member
DeannaSkraba8194
Posts: 3
Registered: ‎12-07-2011
Message 8 of 10 (682 Views)

Re: Raster Design 2013 and MrSID Generation 4

12-13-2013 07:21 AM in reply to: DMillerAmCan

Good morning!

 

Has anyone gotten an update from Autodesk regarding a fix for this? We just received our new imagery in the MrSID Gen4 format and all my online research is point me to this thread.

 

Thank you!

Deanna

Contributor
DMillerAmCan
Posts: 11
Registered: ‎01-28-2009
Message 9 of 10 (676 Views)

Re: Raster Design 2013 and MrSID Generation 4

12-13-2013 10:14 AM in reply to: DMillerAmCan
Not to my knowledge

David Miller
ENGINEERING
[cid:image001.png@01CEF7EC.08EE98C0]
4381 Broadway, Suite 201
American Canyon, CA 94503
707.647.4576 Office
707.643.2389 FAX
dmiller@cityofamericancanyon.org
http://www.cityofamericancanyon.org
Active Contributor
dnietubicz
Posts: 41
Registered: ‎10-23-2006
Message 10 of 10 (133 Views)

Re: Raster Design 2013 and MrSID Generation 4

07-21-2014 01:42 PM in reply to: DMillerAmCan
autodesk doesn't support mr sid Generation 4 images. see this topic.
http://forums.autodesk.com/t5/AutoCAD-Civil-3D-General/2013-mrsid-image-fix/td-p/5015864
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Raster Design Category!

The AutoCAD Raster Design forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!