RD 2012 arrived via download this a.m. loaded it up. so far won't iinsert a 25066 kb MrSid without crashing Map3D 2012 and after using mapiinsert command to load the sid I tried to save the image to jpg. it crashed at 54% saved. SOSDD!
Has anyone tried to build a 64 bit deployment package for Raster Design 2012? I get to the point where I enter the configuration name, Admin image path, target platform and installation settings. As soon as I have them set, I click on Next and get the error "Error 1723. There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." After I click OK to the message, I get "Fatal error during installation. #2178: failed to run AdskExecuteSequence.". Clicking OK to that error gives me "Failed to initialize AutoCAD Raster Design 2012". After these 3 errors, it takes me back to the configuration screen, but is locked up and I need to use Task manager to kill the process.
In addition to the above post, I tried to re-download the raster package and ended up with the same result. The 32 bit version builds without issue.
I've been building these packages on a Windows 7 32 bit PC and my 64 bit versions of AutoCAD, Map3D and LT all built without issue.
Processor Intel(R) Pentium(R) D CPU 2.66GHz, 2654 Mhz, 2 Core(s), 2 Logical Processor(s) 32 bit
ATI Firepro V5800(FireGL) video w/3 monitors
redundant 1t HDs
4 GB ram/3 available to Map3d
WIN 7 PRo SP 1
I get the same behaivor. I can build a 32 bit deployment but not a 64 bit. I get the same FE #2178.
You cannot create a 64 bit deployment from a 32 bit machine. Run setup from a 64 bit client (Run as Administrator) and save the deployment to the network location of your choice.
This tip came from Subscription Support and I am up and running.
Trabalho com imagens de projeto de ruas na prefeitura municipal de curitiba. Separo em camadas preto e vermelha. A camada preta nunca mudo por isso fica com o cadeado fechado. A camada vermelha é a que preciso vetorizar, apagar. Mas quando uso a ferramenta "remove", fica uma mancha preta. Sempre deu certo, mas desde que foi feita atualização para o Rasterdesign 2012, não consigo apagar a imagem sem aparecer esta mancha. Segue um anexo com o problema. Desde já agradeço a ajuda.
Access a broad range of knowledge to help get the most out of your products and services.
Start with some of our most frequented solutions to get help installing your software.
The AutoCAD Raster Design forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.