Raster Design 2008 not recognized....

[mkmcmanus]

I have installed Raster Design 2008 on top of my Civil 3d 2008 but I get nothing but unrecognized commands for any Raster Design commands. Everything else works great but it seems like Raster Design just is not initialized. This is a stand alone anstall. Any ideas?

Thanks

[Anonymous]

Do a menuload and see if rasterdesign is loaded

[mkmcmanus]

I loaded the menu and it shows up fine but the commands are still not recognized

[mkmcmanus]

I am getting a new error now that says "AeciUi51.arx cannot find a dll or other file that it needs". Any ideas what is causing this?

[Anonymous]

On Tue, 29 May 2007 12:26:47 +0000, mkmcmanus <> wrote:

>I am getting a new error now that says "AeciUi51.arx cannot find a dll or other file that it needs". Any ideas what is causing this?

Try this: Tools->Options->Support file search path.

Make sure that C:\Program Files\Raster Design 2008 OE is one of the
search paths.


Phil Daley

[mkmcmanus]

Thank you. That fixed it. I can't believe that is all I had to do.

[recondite tootsie]

sweet.... searched for this problem and found this thread and fixed the problem

thx

[vw2gruvy]

I searched also and I have come to the conclusion that
I'm so glad that there are lots of people out there that are WAAAY smarter than me! This fixed my problem too!
Thanks so much!

[andrewa]

You guys are great.

dealing with rasterdesign 2009 & that fixed my problem also.

I find myself using this discussion group more than i do the tech support from my retailer.

Thanks again for the much needed info.

[guylain]

I know that this is the fix for this error, but what about in a lab environment that each users use their own account. Any way to get this modification done automatically?

[lassi_tarri]

I had the same problem. I added the Raster OE folder to Support File Search Paths and now I get this:

C:\Program Files (x86)\AutoCAD Raster Design 2009\AeciUi51.arx is an invalid
ARX file.

Any idea? The whole installation of raster in 64bit XP system has been quite a process.

[Anonymous]

You probably need to add the Raster Design main folder to the search
paths, also.

On Wed, 8 Oct 2008 06:47:23 +0000, lassi_tarri@golder.fi <> wrote:

>I had the same problem. I added the Raster OE folder to Support File Search Paths and now I get this:
>
>C:\Program Files (x86)\AutoCAD Raster Design 2009\AeciUi51.arx is an invalid
>ARX file.
>
>Any idea? The whole installation of raster in 64bit XP system has been quite a process.

Phil Daley

[lassi_tarri]

Still says that AeciUi51.arx is an invalid ARX file.

[Anonymous]

Sounds like a reinstall is needed.

On Fri, 10 Oct 2008 07:47:48 +0000, lassi_tarri@golder.fi <> wrote:

>Still says that AeciUi51.arx is an invalid ARX file.

Phil Daley