On the first screen of the insert command there is a checkbox for show
frames only. Try it with that box checked. If the frame comes in you can
select it, right-click, go to the image flyout, and show. This has helped
me in the past.
Pat
"KeniMike" wrote in message
news:11246720.1091825513623.JavaMail.jive@jiveforum1.autodesk.com...
> I'm downloading Mr. Sid files from the following location.
> http://www.tnris.state.tx.us/degquadupdate.cfm?DegreeQuad=CLODINE
>
> The SDW is in UTM 15 Meters
>
> My map is in TX-SC Feet
>
> When I use the Raster Design Insert command and after walking through the
Insertion Wizard prompts and hit Finish, there is a quick flick of the
screen and no raster image inserted.
>
> Hitting F2 shows me only the following happened prior to the command
prompt coming back into place???
>
>
>
> Command: Performing Coordinate System Transformation....