AutoCAD R12/R13/R14 Archive

AutoCAD R12/R13/R14 Archive

Reply
New Member
Fred-G
Posts: 2
Registered: ‎01-16-2013
Message 1 of 4 (451 Views)

Recovery of files corrupted by overwriting on a RW CD

451 Views, 3 Replies
01-16-2013 06:27 PM

Hello all, I've got files that are corrupted from being copied to a RW CD back in 2000 and would like to recover them.  At the time, I didn't know that RW disks don't accept simple overwrites of newer files being copied to disk and now I have a mess.  I've attempted to find this out over the years since my error and haven't been able to resolve this.  Now that it's 2013 I figure I'll ask again.  Thanks in advance for your help.  And yes I did Google this and tried a recovery software but no dice so I'm here.

 

Fred

*Expert Elite*
pendean
Posts: 22,933
Registered: ‎11-06-2003
Message 2 of 4 (443 Views)

Re: Recovery of files corrupted by overwriting on a RW CD

01-17-2013 07:02 AM in reply to: Fred-G

There is no fix for truly corrupt files destroyed by storage issues: post such a DWG for confirmation if you wish for others to try and recover one or two.

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
New Member
Fred-G
Posts: 2
Registered: ‎01-16-2013
Message 3 of 4 (440 Views)

Re: Recovery of files corrupted by overwriting on a RW CD

01-17-2013 11:28 AM in reply to: pendean

Dean, thanks for your prompt reply.

 

I've attached a .dwg file per your suggestion and cross my fingers.

 

Thanks,

Fred

*Expert Elite*
pendean
Posts: 22,933
Registered: ‎11-06-2003
Message 4 of 4 (434 Views)

Re: Recovery of files corrupted by overwriting on a RW CD

01-17-2013 06:03 PM in reply to: Fred-G

Your file contains no header: sadly it will never be recoverable, that's a key requirement for all electronic files.

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.