AutoCAD R12/R13/R14 Archive

AutoCAD R12/R13/R14 Archive

Reply
*Melissa
Message 1 of 3 (763 Views)

Polylines/Busellato/Autolink

763 Views, 2 Replies
03-10-2000 08:29 AM
I need to know if it is possible to draw a polyline with one end being zero
and the other being anything greater than zero. I am trying to desiginate
the tool direction with this polyline that appears to look like an arrow.

If anyone is using Autolink to convert their drawings into G-Code and can
assign a tool direction in another way, I would be interested in reading how
you are accomplishing this. Thanks Melissa
*Furman, Paul
Message 2 of 3 (763 Views)

Re: Polylines/Busellato/Autolink

03-10-2000 10:52 AM in reply to: *Melissa
Do you mean z elevation other than 0? 3Dpolys will do that or changing your ucs.
If you mean width, that is easy, built into the pline command (starting
width/ending width).

Melissa wrote:

> I need to know if it is possible to draw a polyline with one end being zero
> and the other being anything greater than zero. I am trying to desiginate
> the tool direction with this polyline that appears to look like an arrow.
>
> If anyone is using Autolink to convert their drawings into G-Code and can
> assign a tool direction in another way, I would be interested in reading how
> you are accomplishing this. Thanks Melissa
New Member
elzermankyle
Posts: 1
Registered: ‎03-20-2012
Message 3 of 3 (647 Views)

Re: Polylines/Busellato/Autolink

03-20-2012 01:56 PM in reply to: *Melissa

You need to make sure your polyline is drawn in the direction of your wanted tool path. select your polyline and hit edit vertex and make sure its moving in the direction that you want. the polyline arrow needs to be on an endpoint, and needs some elevation to ramp in. hope this helps.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.