AutoCAD R12/R13/R14 Archive

AutoCAD R12/R13/R14 Archive

Reply
*zvi vikinski
Message 1 of 3 (105 Views)

diameter dimensioning

105 Views, 2 Replies
05-14-2004 03:51 AM
an undesired change has occured in my acad-please help me to turn it back. the diamter and radius dimension looked always like a leader with a segment of horizontal line and horizontal text now it looks like a line with two arrows inside or outside the circle ant text in direction with the dimension line. think i tried to change everything possible in the dimstyle dialog box without success. thank for your kind assistance zvi
Distinguished Contributor
madcadd
Posts: 2,768
Registered: ‎01-05-2004
Message 2 of 3 (105 Views)

Re: diameter dimensioning

05-14-2004 06:49 AM in reply to: *zvi vikinski
Hi zvi,

I've attached a .jpg to show you the problem. In Dim Styles, Format button, Text (make sure "Outside Horizontal" is checked. The circle I show has what you have and what you want. Then you will return to what you had. GL
*zvi vikinski
Message 3 of 3 (105 Views)

Re: diameter dimensioning

05-14-2004 10:18 AM in reply to: *zvi vikinski
thanks,it works zvi "madcadd" wrote in message news:7716971.1084542620171.JavaMail.jive@jiveforum2.autodesk.com... > Hi zvi, > > I've attached a .jpg to show you the problem. In Dim Styles, Format button, Text (make sure "Outside Horizontal" is checked. The circle I show has what you have and what you want. Then you will return to what you had. GL
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.