AutoCAD Plant 3D General DIscussion

AutoCAD Plant 3D General DIscussion

Reply
Contributor
followsea
Posts: 12
Registered: ‎09-22-2011
Message 1 of 3 (403 Views)

Where the block based catalog parts saved?

403 Views, 2 Replies
02-16-2012 12:40 AM

I created my own pipes, fittings, valves catalogs, a big portion  is block based parts. But in the beginning I didn't  create the same name folders with the catalogs. Without these folders, catalogs and specs works well. I finished a watertreatment project with them already.

But when I copy these catalogs(pcat) and specs to another computer and place models into the model, I get error message "Can't find symbol for specified part."

My problems are:

1. Without 200 and dwg folders, where are "longhexnumber" blocks and thumbnail pictures stored?

2. How can I copy catalogs to other computers ?

3. How can I get into the right way? After so many custom block based parts created without 200 and dwg folder, I tried create a same name folder with the catalog. But  when I make new block based parts, it cannot work. If I place new parts to model, I get "Can't find symbol for specified part." The newly created part on the tool pallete was a blank box.  

Recreate all block based parts are nightmare. Why no prompt when i was in a wrong way? 

Anyone can help me?  Thanks.

I use P3D 2012. 

Employee
TomislavGolubovic
Posts: 545
Registered: ‎12-01-2010
Message 2 of 3 (399 Views)

Re: Where the block based catalog parts saved?

02-16-2012 02:08 AM in reply to: followsea

Have a look through the sub-folders of the Content folder from your C:\, and compare it to the second computer.

 

You can move that content to a network drive also, check under the Menu's, there is a menu to change the path.



Tomislav Golubovic
Plant Solutions Engineer
Autodesk Australia / New Zealand
Autodesk, Inc.

Contributor
followsea
Posts: 12
Registered: ‎09-22-2011
Message 3 of 3 (384 Views)

Re: Where the block based catalog parts saved?

02-16-2012 09:10 PM in reply to: followsea

I copied the whole folder "C:\Autocad Plant 3D content" to another computer. The folder in destination computer is also "C:\Autocad Plant 3D content". I checked two computers in Spec Editor menu, the shared content folder were both "C:\AutoCAD Plant 3D 2012 Content".

 

Below is my folder structure:

 

11.jpg

Catalogs are in "\CPak GB":

22.jpg

 

My  drawing with blocks are in "\Models".

 

I searched for the longhexnumer drawings throughout the C:\Autocad Plant 3D contens folder. Nothing was found.

Where is they?  Why it works well in modeling pipe without longhexnumber drawings and 200 and dwg folder? 

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Plant 3D Category!

The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.