Like this kind of componets in the picture. The catologue and the iso skey are all custom by users. And then when making ISOdraft the problem in the 1st picture occurred.
In their projects, there are many components like this, for example, multiple-way vavle (as picture) also has the same problem.
We has been nagged by this problem for a long time. Please help us to solve it.
Thanks a million.
I have the same problem with the isogen. I use P3D 2013.
The isogen can not handle well the multiple port valves properly (more than two ports) unless the ports point against eachother in a valve.
If the port centerlines does not come together in one point, the iso generator will not put properly the symbol.
You can see the iso centerline when you select in the 3D model a component. And the centerlines do not intersect eachother in the valve.
Unfortunately I do not know the solution for that problem.
I think it is a isogen issue and has to be developed in the future.
the valves in plant are 'inline' components, what you have in your model, I would call a piece of equipment, not a valve
Access a broad range of knowledge to help get the most out of your products and services.
Start with some of our most frequented solutions to get help installing your software.
The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.
Upgrading to a 2015 product? Make sure to check these out 1st!