AutoCAD Plant 3D General DIscussion

AutoCAD Plant 3D General DIscussion

Reply
Active Member
randy_trinity
Posts: 6
Registered: ‎02-15-2012
Message 1 of 4 (1,335 Views)
Accepted Solution

Troubleshooting - Iso Production Error

1335 Views, 3 Replies
10-04-2013 01:57 PM

I have created my own Iso Style, I have done so in the past with no problems. But I am getting an error, and I am not sure why. The default ISO styles work just fine.  Here is the log report. 

 

INFO - Loaded '1' model(s).
INFO - Processing: '10-HPRG-110-CS600'.
WARNING - No break points have been specified.
INFO - Model-split has been skipped.
WARNING - Invalid filter expression: 'Existing = 'false' AND SpoolNumber <> '''.
INFO - Placing annotations for 10-HPRG-110-CS600
INFO - Initial layout generated in 00:00:33.6266064
INFO - Status ;Type ;Content ;Combined Severity;Elapsed Time ;Details
INFO - ------- ;--------------------;--------------------;-----------------;------------------;--------------------------------------------------------------------------------
INFO - 1 SET ;AnnotationBlock ;Block ;0 ;00:00:00.0925931 ;Pos:< 19.933, 1.200>;< 20.033, 1.300>SVR:< 0>;<NOTHING >;PR :<12>; AR:<12>CRS:< 0>;
INFO - 2 SET ;AnnotationBlock ;Block ;0 ;00:00:00.0946032 ;Pos:< 19.933, 1.633>;< 20.033, 1.533>SVR:< 0>;<NOTHING >;PR :<10>; AR:<10>CRS:< 0>;
INFO - 3 SET ;AnnotationBlock ;Block ;0 ;00:00:00.0948113 ;Pos:< 20.067, 13.900>;< 20.167, 13.800>SVR:< 0>;<NOTHING >;PR :<10>; AR:<10>CRS:< 0>;
INFO - 4 SET ;GroupedAnnotations ;Group ;0 ;00:00:00.0949656 ;Pos:< 20.400, 14.233>;< 20.400, 14.400>SVR:< 0>;<NOTHING >;PR :< 8>; AR:< 8>CRS:< 0>;
INFO - 5 SET ;AnnotationBlock ;Block ;0 ;00:00:00.0986010 ;Pos:< 20.533, 7.833>;< 20.467, 7.767>SVR:< 0>;<NOTHING >;PR :< 8>; AR:< 8>CRS:< 0>;
INFO - 6 SET ;GroupedAnnotations ;Group ;0 ;00:00:00.0987582 ;Pos:< 10.433, 20.267>;< 10.600, 20.267>SVR:< 0>;<NOTHING >;PR :< 8>; AR:< 8>CRS:< 0>;
INFO - 7 SET ;AnnotationBlock ;Block ;0 ;00:00:00.0991080 ;Pos:< 10.700, 19.600>;< 10.800, 19.500>SVR:< 0>;<NOTHING >;PR :<10>; AR:<10>CRS:< 0>;
INFO - 8 SET ;AnnotationBlock ;Block ;0 ;00:00:00.0993502 ;Pos:< 20.033, 14.300>;< 19.933, 14.400>SVR:< 0>;<NOTHING >;PR :<10>; AR:<10>CRS:< 0>;
INFO - 9 SET ;AnnotationBlock ;Block ;21 ;00:00:00.1386299 ;Pos:< 14.933, 16.433>;< 14.967, 16.333>SVR:< 21>;<NOTHING >;PR :< 8>; AR:<29>CRS:< 0>;
INFO - 10 SET ;GroupedAnnotations ;Group ;21 ;00:00:00.1389362 ;Pos:< 1.900, 15.333>;< 2.067, 15.333>SVR:< 0>;<NOTHING >;PR :< 8>; AR:< 8>CRS:< 0>;
INFO - 11 SET ;AnnotationBlock ;Block ;21 ;00:00:00.1395669 ;Pos:< 2.600, 14.800>;< 2.500, 14.900>SVR:< 0>;<NOTHING >;PR :<10>; AR:<10>CRS:< 0>;
INFO - 12 SET ;AnnotationBlock ;Block ;38 ;00:00:01.9090825 ;Pos:< 10.433, 20.667>;< 10.333, 20.767>SVR:< 17>;<DIMEXTLINE >;PR :<10>; AR:<23>CRS:< 1> (C0,A0,M0,L0,E1,B0);
INFO - 13 SET ;GroupedAnnotations ;Group ;44 ;00:00:01.9120927 ;Pos:< 10.200, 19.333>;< 10.200, 19.500>SVR:< 6>;<NOTHING >;PR :< 8>; AR:<14>CRS:< 0>;
INFO - 14 SET ;AnnotationBlock ;Block ;44 ;00:00:01.9125307 ;Pos:< 9.933, 19.333>;< 9.833, 19.433>SVR:< 0>;<NOTHING >;PR :<10>; AR:<10>CRS:< 0>;
INFO - 15 SET ;AnnotationBlock ;Block ;44 ;00:00:01.9126721 ;Pos:< 6.000, 17.700>;< 6.100, 17.667>SVR:< 0>;<NOTHING >;PR :< 8>; AR:< 8>CRS:< 0>;
INFO - 16 SET ;AnnotationBlock ;Block ;44 ;00:00:01.9131117 ;Pos:< 2.700, 6.900>;< 2.367, 7.000>SVR:< 0>;<NOTHING >;PR :<24>; AR:<24>CRS:< 0>;
INFO - 17 SET ;AnnotationBlock ;Block ;44 ;00:00:01.9135713 ;Pos:< 2.633, 7.500>;< 2.533, 7.600>SVR:< 0>;<NOTHING >;PR :<10>; AR:<10>CRS:< 0>;
INFO - 18 SET ;AnnotationBlock ;Block ;44 ;00:00:01.9140054 ;Pos:< 1.800, 14.633>;< 1.900, 14.533>SVR:< 0>;<NOTHING >;PR :<10>; AR:<10>CRS:< 0>;
INFO - 19 SET ;AnnotationBlock ;Block ;44 ;00:00:01.9141392 ;Pos:< 1.800, 11.167>;< 1.867, 11.233>SVR:< 0>;<NOTHING >;PR :< 8>; AR:< 8>CRS:< 0>;
INFO - ============================================================================================
INFO - Layout for 10-HPRG-110-CS600 with severity 2.31578947368421 was generated in 00:00:02.2253101 using 'Default branch order' and annotation order 'EndConnection,LineNumber,EverythingElse'...
INFO - Layout accepted.
INFO - ============================================================================================
INFO - ********************************************************************************************
INFO - Acceptable layout with the severety less than 10000 has been found.
INFO - Choose layout with severity 2.31578947368421 generated using branch order 'Default branch order' and filterScheme 'EndConnection,LineNumber,EverythingElse'
INFO - Elapsed time: 00:00:02.2453333
INFO - ********************************************************************************************
FAILURE - eKeyNotFound
-------------------------------------------------------------------------------

Active Member
randy_trinity
Posts: 6
Registered: ‎02-15-2012
Message 2 of 4 (1,279 Views)

Re: Troubleshooting - Iso Production Error

10-09-2013 08:29 AM in reply to: randy_trinity

I have figured it out with a little research, I did not have my title block named "title block".

Product Support
quentin.contreras
Posts: 331
Registered: ‎03-02-2010
Message 3 of 4 (1,267 Views)

Re: Troubleshooting - Iso Production Error

10-09-2013 11:40 AM in reply to: randy_trinity

That is good news you were able to find the error to your issue! Thank you for coming back on here and letting us know. :smileyhappy:

If my post answers your question, please mark it as an Accepted Solution, so that others can find answers quickly!



Quentin Contreras
Member
mtchad
Posts: 3
Registered: ‎05-05-2012
Message 4 of 4 (260 Views)

Re: Troubleshooting - Iso Production Error

04-17-2014 11:04 AM in reply to: randy_trinity

I having the same issue but this did not work, is there anything else I can do?

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Plant 3D Category!

The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.