AutoCAD Plant 3D General DIscussion

AutoCAD Plant 3D General DIscussion

Reply
Active Member
Gablafrance
Posts: 6
Registered: ‎06-27-2012
Message 1 of 5 (711 Views)
Accepted Solution

Title block fields and attributes

711 Views, 4 Replies
07-18-2012 06:37 AM

Hi everyone,

 

I've been asked to create a new .dwt for P3D ortho drawing and I have to add fields in the title block that are linked to project information such as Client name, project name, author, project manager. I'd like to know if it's possible to link those fields to the project set-up so I only have to enter those once and modify them after if the author of the drawing change or whatever.

 

I know my english isn't perfect so feel free to ask question, I really need an answer

 

Thanks

 

Gab!

this is possible, when you insert a field, there is a new entry called "Project" and that has the P3D project properties to add in as fields.

Valued Contributor
milic.srdjan
Posts: 65
Registered: ‎02-22-2011
Message 2 of 5 (707 Views)

Re: Title block fields and attributes

07-18-2012 07:30 AM in reply to: Gablafrance

Why....

 

Too Complicate....

 

It is good idea I think to make template for ORTHO drawings with information that You need to be fix....and put additional information as block with attributes....

 

Always , when You start dialog for ORTHO creation You have chance to start with template...

 

and..at end I think that is possible do make ....

 

I do not have time to post all work flow but if You look at....

 

http://docs.autodesk.com/PLNT3D/2013/ENU/filesPCR/GUID-745794C2-1657-4393-92F0-B20A03B38F62.htm

 

You will find additional information....

 

Srdjan

Active Member
Gablafrance
Posts: 6
Registered: ‎06-27-2012
Message 3 of 5 (704 Views)

Re: Title block fields and attributes

07-18-2012 07:47 AM in reply to: milic.srdjan

My template is already created and works well, all the fields have been added. My problem is to link those fields to project properties so they fill themselves when I set-up a new project, because, for the moment, I have to fill them by the drawing properties menu.

Employee
TomislavGolubovic
Posts: 553
Registered: ‎12-01-2010
Message 4 of 5 (696 Views)

Re: Title block fields and attributes

07-18-2012 03:54 PM in reply to: Gablafrance

this is possible, when you insert a field, there is a new entry called "Project" and that has the P3D project properties to add in as fields.



Tomislav Golubovic
Plant Solutions Engineer
Autodesk Australia / New Zealand
Autodesk, Inc.

Active Member
Gablafrance
Posts: 6
Registered: ‎06-27-2012
Message 5 of 5 (682 Views)

Re: Title block fields and attributes

07-19-2012 05:34 AM in reply to: TomislavGolubovic

I finally found out how to do, thanks a lot for your replies!

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Plant 3D Category!

The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.