another comment. The program insert with incorrect orientation all stub-in connecions. It's happen when the stub-in it's not form part of the iso:
Did you resolve it?!....
I have one day and a Half trying to find a answer at the moment, my solution is when generate ISO.dwg, rotate each one acad block "SplitMark" to right direction, from properties.
If you have a better solution, please can you share it.?!.
this is my messege with same problem
Hi Yuri again,
Speaking about this problem, I replay you that my solution was rotate AcadBlock "SplitMark" from properties.
But this solution create a wrong coordinates, so this solution is not good.
Also I change weld node (Only Weld node) to each different pipe some times in manifold and some times in branch pipe, but it is still not work.
Sorry, any Idea?
I don't find any solution in this moment.
Access a broad range of knowledge to help get the most out of your products and services.
Start with some of our most frequented solutions to get help installing your software.
The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.
Upgrading to a 2015 product? Make sure to check these out 1st!