AutoCAD Plant 3D General DIscussion

AutoCAD Plant 3D General DIscussion

Reply
Contributor
robertstroz8845
Posts: 13
Registered: ‎06-15-2009
Message 1 of 5 (316 Views)
Accepted Solution

strange hot key behavior since SP1 install

316 Views, 4 Replies
08-23-2012 08:17 AM

     When I use my Osnaps, I use shift+right click, then use a single hot key (as underlined when the menu opens).

Since installing SP1 for 2013, I can only use the hot key once (after a short while I can use a hot key once again), next time I try to use a hot key, it just closes the menu and redirects the key entry into the command prompt.

Any thoughts on what is going on here?  BTW, this does seem to be just in Autocad/ plant as excel still "hot keys" normally.

Thanks, Rob

Looks like the latest SP1.1 for x64 win7 has fixed this issue; although, I did not notice it mentioned within the readme.

Rob.

*Expert Elite*
DarrenP
Posts: 7,575
Registered: ‎09-13-2007
Message 2 of 5 (309 Views)

Re: strange hot key behavior since SP1 install

08-23-2012 10:46 AM in reply to: robertstroz8845

there is no SP1 for Plant 3d 2013

Employee
LeeKB
Posts: 3
Registered: ‎08-19-2009
Message 3 of 5 (306 Views)

Re: strange hot key behavior since SP1 install

08-23-2012 10:57 AM in reply to: robertstroz8845

Hi Rob,

 

Could you provide the details of the hot key issue you experieced with AutoCAD 2013 SP1?  You can contact me via my email - kb.lee@autodesk.com directly.

 

Thanks,

KB Lee

 

AutoCAD Test Development

Contributor
robertstroz8845
Posts: 13
Registered: ‎06-15-2009
Message 4 of 5 (271 Views)

Re: strange hot key behavior since AutoCAD 2013 SP1 install

08-25-2012 09:13 AM in reply to: DarrenP

You are correct, this issue also effects using Osnaps in Plant3d (and apparently all other verticals based upon AutoCAD 2013 for which SP1 was installed upon).  I posted it here since my Suite of products are under the Plant design ultimate suite.

 

I have found others with this problem:

http://forums.autodesk.com/t5/AutoCAD-2013/SP-1-Is-Available/m-p/3593090#M4961

http://forums.autodesk.com/t5/AutoCAD-2013/Mouse-wheel-click-snap-menu/m-p/3593148#M4968

 

Contributor
robertstroz8845
Posts: 13
Registered: ‎06-15-2009
Message 5 of 5 (241 Views)

Re: strange hot key behavior since SP1 install

09-12-2012 09:17 AM in reply to: robertstroz8845

Looks like the latest SP1.1 for x64 win7 has fixed this issue; although, I did not notice it mentioned within the readme.

Rob.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Plant 3D Category!

The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!