AutoCAD Plant 3D General DIscussion

AutoCAD Plant 3D General DIscussion

Reply
Valued Contributor
neonade
Posts: 64
Registered: ‎11-22-2010
Message 1 of 4 (389 Views)
Accepted Solution

Spool Tag on Isometic Box Enclosure

389 Views, 3 Replies
11-22-2011 01:04 AM

Rectangular enclosure for spool tags does not adjust automatically, is there a setting for this that i can deal with.

Thanks

No resizable enclosure styles are exposed from annotaiton setup in project properties. To use such style, 'IsoConfig.xml' has to be edited manually. Find annotation defintion for 'Spool" and change AnnotationStyle="Rectangle"to AnnotationStyle="SRectangle". SRectangle is a style defined with resizable block.

 

 <PropertyChangeScheme Name="SpoolNumber" AnnotationStyle="SRectangle" Format="{0}" Enabled="true" Grouping="false" Tag="XX" Alignment="FlatHorizontal" LeaderStyle="AsNeeded" Filter="NotBoltWeldFlangeGasket" Field="SpoolNumber" Placement="Along" />

 

-Weiyu

Mentor
thebearjed
Posts: 234
Registered: ‎10-05-2009
Message 2 of 4 (355 Views)

Re: Spool Tag on Isometic Box Enclosure

12-19-2011 06:03 AM in reply to: neonade

i have the exact same issue. 

 

where is the support for the new version of isometrics? getting rid of spoolgen was bad enough but there is so little help with the new format.

Employee
weiyu.xu
Posts: 9
Registered: ‎11-02-2009
Message 3 of 4 (341 Views)

Re: Spool Tag on Isometic Box Enclosure

12-19-2011 02:20 PM in reply to: neonade

No resizable enclosure styles are exposed from annotaiton setup in project properties. To use such style, 'IsoConfig.xml' has to be edited manually. Find annotation defintion for 'Spool" and change AnnotationStyle="Rectangle"to AnnotationStyle="SRectangle". SRectangle is a style defined with resizable block.

 

 <PropertyChangeScheme Name="SpoolNumber" AnnotationStyle="SRectangle" Format="{0}" Enabled="true" Grouping="false" Tag="XX" Alignment="FlatHorizontal" LeaderStyle="AsNeeded" Filter="NotBoltWeldFlangeGasket" Field="SpoolNumber" Placement="Along" />

 

-Weiyu

Mentor
thebearjed
Posts: 234
Registered: ‎10-05-2009
Message 4 of 4 (320 Views)

Re: Spool Tag on Isometic Box Enclosure

12-21-2011 01:02 PM in reply to: weiyu.xu

why in the world would the default not be set to "SRectangle"? that is just silly.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Plant 3D Category!

The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.