Rolled Fitting Angle on iso

[polandj]

I have a situation where I have a 12" rolled tee on a 30 degree angle. I have another line, with a different line number, tied-in to this rolled tee.

When I iso the line with the rolled tee, Plant does not show the rolled angle on the iso.

Anybody?

[KenFauver]

It's required that you have pipe attached to the branch side of the tee in order for the angle to show on the isometric.

[polandj]

There is a line connected to the tee in this situation. However, Plant 3D apparently has issues when said line has a different line number. In other words, that's going to be a field weld.