AutoCAD Plant 3D General DIscussion

AutoCAD Plant 3D General DIscussion

Reply
Valued Contributor
patpat78
Posts: 51
Registered: ‎06-20-2011
Message 1 of 7 (275 Views)
Accepted Solution

Report multiple sheet

275 Views, 6 Replies
07-26-2012 08:18 AM

hello

 

i try to use the report creator for generating a report with all instrumentation 

easy :smileywink:

i made  sorting list by supplier but i need to generate one excel sheet  by supplier is it possible ?

 

 

thank's a lot

 

 

Hi,

 

Sure it is. Report Creator can create almost every list.

 

Take a look at the video:

 

ftp://acplant.net/Videos/ADSK%20Forum/PR_Grouping_120727.wmv

 

Regards,

 

Carsten

Active Contributor
cbeinecke
Posts: 47
Registered: ‎05-13-2008
Message 2 of 7 (264 Views)

Re: Report multiple sheet

07-27-2012 01:14 AM in reply to: patpat78

Hi,

 

Sure it is. Report Creator can create almost every list.

 

Take a look at the video:

 

ftp://acplant.net/Videos/ADSK%20Forum/PR_Grouping_120727.wmv

 

Regards,

 

Carsten

Valued Contributor
patpat78
Posts: 51
Registered: ‎06-20-2011
Message 3 of 7 (260 Views)

Re: Report multiple sheet

07-27-2012 03:23 AM in reply to: cbeinecke

OK very nice thank you

 

but is it possible to put 1 supplier by sheet in excel ?

 

because in the preview it ok but in excel not

 

thx

Active Contributor
cbeinecke
Posts: 47
Registered: ‎05-13-2008
Message 4 of 7 (258 Views)

Re: Report multiple sheet

07-27-2012 04:22 AM in reply to: patpat78

Hi,

 

you can actually create various different file formats.

 

After you selected the report click on Edit... (I hope that is what the button says in the English version). Under "Target" you can define the file type and the path/filename.

 

For more details: go to http://docs.acplant.com/PlantTools/EN/PlantTools.html and look under: PlantReporter > Configuration > Create new configuration. Scroll down till hit find the topic "Output Type". Of course the whole chapter may be interesting.

 

Regards,

 

Carsten

Valued Contributor
patpat78
Posts: 51
Registered: ‎06-20-2011
Message 5 of 7 (256 Views)

Re: Report multiple sheet

07-27-2012 05:26 AM in reply to: patpat78

thank you very much it's work fine :smileywink:

Active Contributor
cbeinecke
Posts: 47
Registered: ‎05-13-2008
Message 6 of 7 (252 Views)

Re: Report multiple sheet

07-27-2012 05:31 AM in reply to: patpat78

Tip: The layout of your report effects the layout of your Excel sheet. For example if you get very small columns in Excel it means that the objects in your layout are slightly either overlapping or they have a little gap between them. Just play a little with the position o the object to see the effect. If you understand how it works, you can start aligning all the object so the Exccel sheet looks nice.

 

Regards,

 

Carsten

Valued Contributor
patpat78
Posts: 51
Registered: ‎06-20-2011
Message 7 of 7 (242 Views)

Re: Report multiple sheet

07-28-2012 04:21 AM in reply to: patpat78

unfortunatly i was to quick to said it's work.. 

 

in pict 1 you can see it's ok in perview

 

but take a look of pict 2 the excel file....

 

what i need it's the same as preview but in multiple excel sheet any idea ?

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Plant 3D Category!

The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.