AutoCAD Plant 3D General DIscussion

AutoCAD Plant 3D General DIscussion

Posts: 3
Registered: ‎04-23-2010
Message 1 of 4 (903 Views)

Plant 3D Specs

903 Views, 3 Replies
07-05-2011 08:26 AM

I am new to Plant and just have a couple questions for anyone out there!!


Can plant do the following.


The specs we need in a 3d piping Tank platform are:


Ductile Iron both MJ and DI Flanged (American Cast Iron Pipe

Carbon Steel CS150 through 300  125lb ANSI and 150lb

Stainless Steel most common schedules 304 and 316

HDPE (Drisco pipe or IPS)

PVC Sch 40 and 80

Drain Waste Vent (Tyler Pipe)


Large database of valves (Plug, Butterfly (wafer and
flanged), Gate, Ball, Check, FCV’s, Globe) (MFR’s - Dezurik, Hammond, Nibco,
ACIPCO, etc)


Any info would be appreciated.

Valued Contributor
Posts: 92
Registered: ‎11-02-2009
Message 2 of 4 (890 Views)

Re: Plant 3D Specs

07-05-2011 11:03 AM in reply to: sherring

Yes it is. Without problem.

New Member
Posts: 2
Registered: ‎06-11-2009
Message 3 of 4 (675 Views)

Re: Plant 3D Specs

12-14-2011 07:38 AM in reply to: sherring

Currently there is no HDPE for plant

Valued Mentor
Posts: 470
Registered: ‎04-08-2010
Message 4 of 4 (669 Views)

Re: Plant 3D Specs

12-14-2011 10:42 AM in reply to: sherring

Sch 40 / 80 - you will have to make alot of your own fittings.  It is missing quite a few.

An education isn't how much you have committed to memory, or even how much you know. It's being able to differentiate between what you know and what you don't.
"Do or do not... there is no try"
Master Yoda.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Plant 3D Category!

The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.