Solved: Re: PISOGEN FAULT 48

Ruffy85 · ‎03-02-2011

Hey!

I will create an ISO but my Plant 3d shows me the follow message. I have only used one flange from my own spec

Need fast help!

If my reply was helpful, please give a "Kudo" or click the "Accept as Solution" button below (or both).

PeterQuinn · ‎03-06-2011

Check the paths in the ISOGEN.FLS file in the \Isogen\Final directory of your project. You may have moved your project and the path is hardcoded to a path that doesn't exist.

If this isn't it, can you post the message file from Isogen - it often has hints.

Also, can you run other lines in this project without a problem?

Peter Quinn
Senior Product Manager
Autodesk, Inc.

Ruffy85 · ‎03-07-2011

Find and older Thread with the same error + Solution. Thanks!

If my reply was helpful, please give a "Kudo" or click the "Accept as Solution" button below (or both).

Anonymous · ‎04-09-2011

I have the same problem and can't fix the problem.

Anonymous · ‎04-09-2011

Ruffy where is that thread and the solution could you please share with me?

Ruffy85 · ‎12-13-2011

Sorry for so late Answer

Of course here is the link!

http://forums.autodesk.com/t5/AutoCAD-Plant-3D/Error-48-Unknown-Error-in-PISOGEN/m-p/2843260

If my reply was helpful, please give a "Kudo" or click the "Accept as Solution" button below (or both).

PISOGEN FAULT 48

PISOGEN FAULT 48

Forums Links

Post to forums