AutoCAD Plant 3D General DIscussion

AutoCAD Plant 3D General DIscussion

Reply
Active Member
JOHNMCDOWELL8178
Posts: 9
Registered: ‎02-05-2010
Message 1 of 4 (738 Views)
Accepted Solution

Piping Service Code

738 Views, 3 Replies
11-15-2011 11:47 AM

How do I set the service code on a line prior to running the 3D pipe? I am using Plant 3D 2012.

Hi John,

 

In reply to Tom's suggestion, here is some additioal information on the line group tags.

 

Configuring the service for the pipe run prior to routing would require a line number tag configuration in Project Setup similar to this:

 

P3D_LINE_GROUP.png

 

 

Which allows the service to be set before routing the pipe:

 

ROUTE_NEW_LINE1.png

 

ROUTE_NEW_LINE2.png

 

Thank you,

Employee
TomislavGolubovic
Posts: 542
Registered: ‎12-01-2010
Message 2 of 4 (727 Views)

Re: Piping Service Code

11-15-2011 05:36 PM in reply to: JOHNMCDOWELL8178

In the ribbon, when you click on the pulldown marked "Route New Line" if you have the Service setup in the Line Code, then you can input the service there. If not, then run the line, right click on it, and set it in the properties.



Tomislav Golubovic
Plant Solutions Engineer
Autodesk Australia / New Zealand
Autodesk, Inc.

Active Member
JOHNMCDOWELL8178
Posts: 9
Registered: ‎02-05-2010
Message 3 of 4 (718 Views)

Re: Piping Service Code

11-16-2011 04:43 AM in reply to: TomislavGolubovic

Thanks for your reply. Can you explain how to set up Service in the Line Code under "Route New Line"?

Product Support
jason.drew
Posts: 322
Registered: ‎06-17-2010
Message 4 of 4 (702 Views)

Re: Piping Service Code

11-18-2011 02:56 PM in reply to: JOHNMCDOWELL8178

Hi John,

 

In reply to Tom's suggestion, here is some additioal information on the line group tags.

 

Configuring the service for the pipe run prior to routing would require a line number tag configuration in Project Setup similar to this:

 

P3D_LINE_GROUP.png

 

 

Which allows the service to be set before routing the pipe:

 

ROUTE_NEW_LINE1.png

 

ROUTE_NEW_LINE2.png

 

Thank you,



Jason Drew
Premium Support Specialist
Product Support
Autodesk, Inc.





If my post answers your question, please click the "Accept as Solution" button. This helps everyone find answers more quickly.
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Plant 3D Category!

The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.