AutoCAD Plant 3D Forum
Welcome to Autodesk’s AutoCAD Plant 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Plant 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Piping Service Code

3 REPLIES 3
SOLVED
Reply
Message 1 of 4
maxpiper
1306 Views, 3 Replies

Piping Service Code

How do I set the service code on a line prior to running the 3D pipe? I am using Plant 3D 2012.

3 REPLIES 3
Message 2 of 4

In the ribbon, when you click on the pulldown marked "Route New Line" if you have the Service setup in the Line Code, then you can input the service there. If not, then run the line, right click on it, and set it in the properties.



Tomislav Golubovic
Technical Specialist - Plant and Infrastructure
Autodesk Australia / New Zealand
Autodesk, Inc.
Autodesk ANZ YouTube Channel
Message 3 of 4

Thanks for your reply. Can you explain how to set up Service in the Line Code under "Route New Line"?

Message 4 of 4
jason.drew
in reply to: maxpiper

Hi John,

 

In reply to Tom's suggestion, here is some additioal information on the line group tags.

 

Configuring the service for the pipe run prior to routing would require a line number tag configuration in Project Setup similar to this:

 

P3D_LINE_GROUP.png

 

 

Which allows the service to be set before routing the pipe:

 

ROUTE_NEW_LINE1.png

 

ROUTE_NEW_LINE2.png

 

Thank you,



Jason Drew
Designated Support Specialist

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report

”Boost