AutoCAD Plant 3D Forum
Welcome to Autodesk’s AutoCAD Plant 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Plant 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Nozzle Issue

8 REPLIES 8
Reply
Message 1 of 9
thebearjed
504 Views, 8 Replies

Nozzle Issue

For some reason nozzles are showing up in the Data Manager with a reducer type size (see attached). it does not seem to be affecting anything at this time but i can't figure whats going on here.

8 REPLIES 8
Message 2 of 9

What is the heading for the column that those are showing up in?

If my post answers your question, please mark it as an Accepted Solution, so that others can find answers quickly!



Quentin Contreras
Technical Support Specialist


Message 3 of 9

Have you had any succes resolving the issue with the reducer sizes showing up?

If my post answers your question, please mark it as an Accepted Solution, so that others can find answers quickly!



Quentin Contreras
Technical Support Specialist


Message 4 of 9

no sir. i have not.

Message 5 of 9

Sorry, to ask you again but in one of my earlier post I asked you for the name of that header where the reducer sizes are showing up. If possible could you include that in another screen shot?

If my post answers your question, please mark it as an Accepted Solution, so that others can find answers quickly!



Quentin Contreras
Technical Support Specialist


Message 6 of 9

here you go.

Message 7 of 9

Hate to ask you again....but can you now provide me with a screen shot of where one of the sizes is show up on your drawing. This is odd behavior, and need to know what type of connection might be causing this. I did notice some 4" sizes that are showing as you would expect them to. Thanks in advance!

If my post answers your question, please mark it as an Accepted Solution, so that others can find answers quickly!



Quentin Contreras
Technical Support Specialist


Message 8 of 9

I just wanted to let you know that I passed this on to our development team for confirmation on the nozzle sizing issue. They have confirmed that this is an issue. They are currently looking to see if a fix can be provided in a future release or update. 

 

This is a feedback page where customers can make suggestions. This page is monitored by product managers who affect real change and this request can go a long way in changing the product for the better.


http://usa.autodesk.com/adsk/servlet/index?siteID=123112&id=1109794

 

I just wanted to give you the link in case you personally wanted to give feedback to the issue. 

 

If my post answers your question, please mark it as an Accepted Solution, so that others can find answers quickly!



Quentin Contreras
Technical Support Specialist


Message 9 of 9
ebechen
in reply to: quentin.contreras

So,did you solve this problem? Because I met it too. I am using Plant 3D 2016 (because my owner ask me to),and I my Autodesk desktop app tell me there is no any updated.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report

”Boost