I have place a block called title block into the dwt drawing. I see it preview now when I switch to the new iso style, however I still receive the fatal error when placing the bom area. I didn't get a change to post it on the previous post, but I couldn't upload the template file as a dwt. It was giving me an error not a valid file format. So I added the .pdf extension and was able to upload. Please rename to open and review. Bill Anderson Principal Technical Officer D +61 7 3553 3008 M +61 435 326 452 Bill.Anderson@aecom.com AECOM Level 8, 540 Wickham Street, Fortitude Valley, QLD 4006 PO Box 1307 Fortitude Valley QLD 4006 T +61 7 3553 2000 F +61 7 3553 2050
www.aecom.com Please consider the environment before printing this email. .-. -.. - This electronic communication, which includes any files or attachments thereto, contains proprietary or confidential information and may be privileged and otherwise protected under copyright or other applicable intellectual property laws. All information contained in this electronic communication is solely for the use of the individual(s) or entity to which it was addressed. If you are not the intended recipient(s), you are hereby notified that distributing, copying, or in any way disclosing any of the information in this e-mail is strictly prohibited. If you have received this e-mail in error, please notify the sender immediately, and destroy the communication and any files or attachments in their entirety, whether in electronic or hard copy format. Since data stored on electronic media can deteriorate, be translated or modified, AECOM, its subsidiaries, and/or affiliates will not be liable for the completeness, correctness or readability of the electronic data. The electronic data should be verified against the hard copy.